| From | Message |
jclaus98
Dodge Dakota
JOIN HERE
7/11/2006
03:33:14
|
 Subject: More tranny Q's???
IP: Logged
Message:
Ok, I need some more help guys! You guys have been so helpful in the past, I'm hoping you can give me some more info. I need to know if there is anyone out there who has, or has heard of anyone running a Keisler tranny in front of a t-case for a 4x4 model??? I'm building up a 360 to go in my Dak, and I am shooting for over 350ft/lbs torque and I know my NV3500 with snap like a matchstick behind that much torque and I need to know what my options are!!! What am I to do, I have emailed Keisler, but got no response. The guys at KRC say they aren't making a kit anymore so they're out. Does anyone have any suggestions???
|
trey
Dodge Dakota
JOIN HERE
7/31/2006
23:11:37
|  RE: More tranny Q's???
IP: Logged
Message:
I think you are underestimating the nv3500, my 95 runs 12.70's with an 8-3/4 with a detriot locker on 315/35/17 drag radials the trans has being bashed since 95. Only thing I can kill is clutches.
|
enrique
Dodge Dakota
JOIN HERE
7/31/2006
23:34:17
|  RE: More tranny Q's???
IP: Logged
Message:
Hey Trey.. I got a question (or two) whats 8 3/4 mean ? and what is a detroit locker. If i can do that on my tranny to get at least 13's that will be awesome. could you throw me some more info. thanks.
|
vern
Dodge Dakota
JOIN HERE
8/01/2006
06:24:17
| RE: More tranny Q's???
IP: Logged
Message:
enrique-8 3/4 is the rear end or housing[this is from the earlier mopars mid 70,s back,
detroit locker is a posi unit
|
enrique
Dodge Dakota
JOIN HERE
8/01/2006
19:18:54
| RE: More tranny Q's???
IP: Logged
Message:
thanks vern.
|
TexasTodd
Dodge Dakota
JOIN HERE
8/06/2006
20:41:50
|  RE: More tranny Q's???
IP: Logged
Message:
The 8 3/4 rear came on alot of daks, even in 2001, and probably beyond that.
My 01, 4.7, QC was ordered with Trailer towing pack, Tire and handling, etc.
It has the 9.25, and came with 11inch rear drums.
|
gen1dak
Dodge Dakota
JOIN HERE
8/06/2006
23:12:02
| RE: More tranny Q's???
IP: Logged
Message:
The 8 3/4 was out of production long before the Dakota was introduced Tex. Perhaps you meant the 8 1/4?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
