| From | Message |
PB
Dodge Dakota
JOIN HERE
6/16/2006
21:26:23
|
 Subject: accel brass cap and rotor
IP: Logged
Message:
what is the advantage of brass cap and rotors over standard aluminum style.
how has your luck been with 8.5 mm msd super conductor wires in terms of reliability and longjevity
thanks
|
ScojoDak
Dodge Dakota
JOIN HERE
6/16/2006
22:28:11
| RE: accel brass cap and rotor
IP: Logged
Message:
Aluminum corrodes much easier than brass. I use the MSD 8.5mm plug wires and they work just fine.
|
PB
Dodge Dakota
JOIN HERE
6/17/2006
10:06:35
| RE: accel brass cap and rotor
IP: Logged
Message:
does it have a lower resistance than aluminum
|
Obio3
Dodge Dakota
JOIN HERE
6/17/2006
21:31:49
| RE: accel brass cap and rotor
IP: Logged
Message:
Top quality 8 or 8.5 mm plug wires are the way to go. by top quality I mean silicon wires and valconized connecters at both ends. Brass cap and roter last much longer and brass passes electric voltage much better then aluminum.
So many problems .... So little time
|
Riv
Dodge Dakota
JOIN HERE
6/18/2006
23:35:20
| RE: accel brass cap and rotor
IP: Logged
Message:
I have the accel brass cap and rotor, along with the 8.5 superconductor wires. The cap and rotor where a necessity when I installed my accel 300+ digital ignition with the high output coil. the stock aluminum cap was goig into meltdown after just one week.
|
ricekillerRT
Dodge Dakota
JOIN HERE
6/21/2006
13:25:46
| RE: accel brass cap and rotor
IP: Logged
Message:
aluminum is a better conductor, but the secondary part of the ignition system has thousands of ohms of resistance to begin with. brass lasts longer
|
Tony
Dodge Dakota
JOIN HERE
6/22/2006
16:13:02
|  RE: accel brass cap and rotor
IP: Logged
Message:
Copper is a better conductor - which brass is made up of. But besides that, the brass contacts do last longer than any of those silver colored looking contacts.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
