| From | Message |
Jeremy
Dodge Dakota
JOIN HERE
3/14/2006
17:10:44
|
 Subject: wiring
IP: Logged
Message:
hi i gotta question about a dakota. i want to put a carburated 360 in place of a 318 in a 1994 dakota. can you get aftermarket wiring harness that make it easier as far as getting rid of all the pcm and all that stuff.
|
Dan
Dodge Dakota
JOIN HERE
3/14/2006
17:30:28
| RE: wiring
IP: Logged
Message:
if you do that swap your 318 pcm won't work anyways.
|
JasonH
Dodge Dakota
JOIN HERE
3/14/2006
20:37:16
| RE: wiring
IP: Logged
Message:
I have just helped my friend put a carburated 350 into his 1990 chevy truck. The only wires that we had to worry about from the old harness were the grounds, and the alternator wires. For the distributor we had to run a wire to a "key on" fuse. All of the other fuel injection wires were just bundled up and put aside. I would assume that putting a 360 in would be the same process. Someone correct me if I'm wrong.
|
Why not
Dodge Dakota
JOIN HERE
3/14/2006
23:22:41
| RE: wiring
IP: Logged
Message:
Why won't the pcm for a 5.2 work?
|
because
Dodge Dakota
JOIN HERE
3/15/2006
11:39:37
| RE: wiring
IP: Logged
Message:
he's usinig a "carbed" 360. not "injected". therefore no PCM is needed.
|
jeremy
Dodge Dakota
JOIN HERE
3/16/2006
20:03:06
| RE: wiring
IP: Logged
Message:
yeah i want to do away completely with all the computer stuff. so im wondering if i need to rewire anything to make the engine run or can i just use the existing wiring minus the computer
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
