| From | Message |
bob70
Dodge Dakota
JOIN HERE
1/08/2006
15:07:05
|
 Subject: 94 4x4 remove starter?
IP: Logged
Message:
94 4x4 318, My starter is on the way out. to get it out, I guess I need to unhook the bottom end of the steering gear? or arm?, not sure what its called, my haynes manual isn't to clear on exactly what I need to remove.
It says a pin, but I don't see one, can I just undo the bolt at the end where it joins the steering gear and swing it out of the way? or do I have to undo the part that looks like a mini u-joint - and if I need to undo that, how? is that a giant pin going through it?
Thanks for any help!
|
OBIO3
Dodge Dakota
JOIN HERE
1/08/2006
16:48:16
| RE: 94 4x4 remove starter?
IP: Logged
Message:
The arm is called the pitman arm > Never removed a starter on one of these YET but that nut holding the arm on is one B--CH to get lose > I lost 2 front teath years ago restling with one > Be carefull how you go about this >
So many problembes > So little time
|
Dean
Dodge Dakota
JOIN HERE
1/11/2006
16:00:02
| RE: 94 4x4 remove starter?
IP: Logged
Message:
I also have a 94 4x4 3.9 thoe but the starter is the same and i havenever pulled the stearing apart to get it out I've changed the motor in this thing twice and soon to be another (goin to a 360) and thoe it takes some doin you can wiggle it out of the space their
Dean
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
