From | Message |
DakAlack Dodge Dakota JOIN HERE
11/02/2005 21:46:30
|
Subject: Air/Fuel Gauge IP: Logged
Message: Help!
I need to know where to hook the wires up to for my air/fuel gauge. It is a autometer phantom gauge.
|
DakAlack Dodge Dakota JOIN HERE
11/03/2005 08:09:46
| RE: Air/Fuel Gauge IP: Logged
Message: Has anyone set this up before?
|
crow318 Dodge Dakota JOIN HERE
11/03/2005 08:34:36
| RE: Air/Fuel Gauge IP: Logged
Message: You need to tap into the signal from your o2 sensor. How many do you have? You can hook in where the wires go into the PCM or where they are hooked to the o2 sensor. Whichever you feel most comfortable with. Check your repair manual for the wiring diagrams.
|
ucimaplaya2 Dodge Dakota JOIN HERE
11/03/2005 20:54:49
| RE: Air/Fuel Gauge IP: Logged
Message: I have a 2000 r/t and I hooked mine up to the front O2 sensor by splicing into the wire before it goes to the computer. It was easier to get to the wire when its in the harness under the hood than try to reach it from underneath where the harness leaves the o2 sensor and travels up the top of the transmission. Give me your info and Ill tell you where the wire is and what colors it is
|
dakalack Dodge Dakota JOIN HERE
11/07/2005 11:39:40
| RE: Air/Fuel Gauge IP: Logged
Message: I have a 99 dodge dakota 318 4x4
|
ucimaplaya2 Dodge Dakota JOIN HERE
11/07/2005 15:28:05
| RE: Air/Fuel Gauge IP: Logged
Message: According to alldata it looks like the signal wire for the upstream O2 sensor is red with tan and located on the Black C1(number 1 connector) on the PCM under the hood. I hope that helps, let me know if you need any more help and also let me know how it turns out.
|
DakAlack Dodge Dakota JOIN HERE
11/07/2005 22:09:53
| RE: Air/Fuel Gauge IP: Logged
Message: Thanks, I will try it out
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|