| From | Message |
Pete
Dodge Dakota
JOIN HERE
9/13/2005
20:25:44
|
 Subject: Ignition Problem
IP: Logged
Message:
95 Dakota V8- 318 5.2L Magnum 4 wheel Drive. Cranks but will not start. Have replaced crank shaft position sensor, cam shaft and powertrain control module. I'm tearing my hair out here! Please help!
|
moparman
Dodge Dakota
JOIN HERE
9/13/2005
21:24:26
|  RE: Ignition Problem
IP: Logged
Message:
I had this problem to on a 93 318 it was the start run relay that fixed the problem .
|
davec
Dodge Dakota
JOIN HERE
9/14/2005
08:52:26
| RE: Ignition Problem
IP: Logged
Message:
Have you checked anything out? You truck needs 3 things to run. Air, fuel, and spark. If one is missing, truck no run. Something like this...start with the basics. Air is usually not a problem. Check for spark, if you have that, check for fuel. You're missing one most likely. Heck, your gas guage could be off and you might be out of fuel. Or if you've already done this, disregard the whole post:)
dave
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
