| From | Message |
Dennis
Dodge Dakota
JOIN HERE
9/09/2005
11:54:42
|
 Subject: Adding Power Windows
IP: Logged
Message:
I have a 2000 CC 4X4. I'm thinking about attempting to convert my manual crank windows to power windows. Has anybody done this? If I went to the local junk yard for the parts, besides the switches and motors, what else would I need to make sure I take?
Thanks as always
|
curious
Dodge Dakota
JOIN HERE
9/09/2005
15:16:02
| RE: Adding Power Windows
IP: Logged
Message:
just curious, did you get the entire door panels when you grabbed the switches and motors from the junk yard? seems you'd want to use those as well, wouldn't you?
|
Dennis
Dodge Dakota
JOIN HERE
9/12/2005
09:44:51
| RE: Adding Power Windows
IP: Logged
Message:
I haven't gone to the bone yard yet, I was waiting for an anwer on how difficult it would be. Your point is correct though, I would need to take the door panels as well since mine have the hold where the current window crank sits.
|
daddio
Dodge Dakota
JOIN HERE
9/12/2005
09:57:39
| RE: Adding Power Windows
IP: Logged
Message:
you may need to get the window regulators also. it would be nice if you could find a donor truck the same color and just swap doors.
|
Dennis
Dodge Dakota
JOIN HERE
9/12/2005
12:23:55
| RE: Adding Power Windows
IP: Logged
Message:
My truck is solar yellow. I'm not sure if people were afraid of the color back then or what, but it doesn't seem like there are that many around. Finding a donor yellow donor truck is probably pretty difficult but it would be the the easiest solution. I'd more than likely pick up power locks and mirrors as well if I did find one with power windows.
|
mike t
Dodge Dakota
JOIN HERE
9/12/2005
15:10:34
| RE: Adding Power Windows
IP: Logged
Message:
or you could just paint the doors off any donor truck.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
