| From | Message |
Trevor
Dodge Dakota
JOIN HERE
4/27/2002
01:35:50
|
 Subject: Found a 5.9!
IP: Logged
Message:
Hey everyone, i've just got a couple questions for you masterminds. I found an old 360 at a barn i had to clean out the other week and i dove right into it, not knowing that it was a 360, just saw the mopar emblem and i was all for it. Anyways, i found out that its a 360 from 71' to 74' and now im questioning how much work it'll be to get that beast into my 95' 3.9 5 speed kota. I've also got a rebuilt 727 tourque flight in my garage, any info on what all im gonna have to do to make this swap work would be greatly appreciated. thanks a lot
|
moparjoe20
Dodge Dakota
JOIN HERE
4/27/2002
02:22:42
|  RE: Found a 5.9!
IP: Logged
Message:
Check out Schumacher Creative Services Phone# 206-364-7151 They have kits to swap small blocks and big blocks into '87-'96 Dakotas They have the motor mounts and an adaptor to mate the 727 to the stock crossmember it's $385 for the motor mounts and $75 for the adaptor with a new tranny mount.
|
YA
Dodge Dakota
JOIN HERE
4/27/2002
03:27:17
|  RE: Found a 5.9!
IP: Logged
Message:
Just remember the guages are run by the PCM.
|
moparjoe20
Dodge Dakota
JOIN HERE
4/27/2002
11:05:52
| RE: Found a 5.9!
IP: Logged
Message:
I've looked into doing this swap before and if I was going to do it I would either use the wiring harness out of a early carburated Dakota or use a Painless wiring kit. Aftermarket gauges are a must, even if I could make the factory gauges work I would not trust them.
|
Trevor
Dodge Dakota
JOIN HERE
4/27/2002
19:21:34
| RE: Found a 5.9!
IP: Logged
Message:
Hey, thanks a lot moparjoe20, you've helped a lot, i don't plan on being able to do the swap for a couple months, but when i do i'll tell ya how everything goes!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
