| From | Message |
sicminds
GenIII
4/23/2005
11:20:57
|
 Subject: Pacesetter Headers
IP: Logged
Message:
Any one have or try these?
http://www.pacesetterexhaust.com/shorty_headers.htm
thinking abour replacing my stock exhaust manifolds when i put in my mopar rt heads
click me
|
N56629
Dodge Dakota
JOIN HERE
4/23/2005
18:17:31
|  RE: Pacesetter Headers
IP: Logged
Message:
It's a case of - you get what you pay for. In some cases you don't even get that. I've heard complaints of bad welds leaking and or cracking. You can't use quality material, do quality welding and charge for it.
|
T-racy
Dodge Dakota
JOIN HERE
4/24/2005
00:44:04
| RE: Pacesetter Headers
IP: Logged
Message:
Their junk. I put a set on my 93 318 and they lasted about 2 yrs. until all the welds were leaking and it sounded terrible and I had to take them off and weld them up right. Another thing is they didn't bolt up to the original exhaust like they were supposed to. They were about a 1/2-3/4 inch off. The pass. side also hit on the upper A frame when I hit big bumps. Only slightly but it hit just the same. Another thing to consider is when you install them plan on never having your front end aligned again because you won't be able to get to the pass. side upper A frame adjustment. The header completely covers it up.
|
sicminds
GenIII
4/24/2005
11:10:23
| RE: Pacesetter Headers
IP: Logged
Message:
what ones would you recomend?
click me
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
