| From | Message |
Scott
Dodge Dakota
JOIN HERE
1/19/2012
20:00:09
|
 Subject: RE: timing a 4.7 motor
IP: Logged
Message:
if the timing was not set properly after a head gasket was changed could it bend the valves if it was started?
Thanks for any help
|
yes
Dodge Dakota
JOIN HERE
1/20/2012
11:43:43
| RE: timing a 4.7 motor
IP: Logged
Message:
yes & damage pistons
|
trevin
Dodge Dakota
JOIN HERE
5/15/2012
09:11:26
|  RE: timing a 4.7 motor
IP: Logged
Message:
ive run into 2009 HO motor that only has 2 plated chain marks on cam chains. the earlier style that has the 2 plated mARKS on both I have done many of. But I am stumped on this one. So, what position do you put the one color link?? There is only one on the camgear and one on the primary idoler gear!!
|
Carl Johnson
Dodge Dakota
JOIN HERE
9/23/2013
09:38:23
| RE: timing a 4.7 motor
IP: Logged
Message:
We changed the timing chains and gears and tensioners. Truck cranked up for about 2 mins and died. Checked all parts and found out the the exicter cam gear had different slots as to the original. Ordered an original timing set from dealer. Installed all timing components and
cranked engine. Lasted about 2 mins. and died?????? All timing marks are in line.
Does anyone think that the first replacement with the wrong exciter cam caused damage???
Need help. Vehicle has been in shop for 2 weeks.
|
CarlJr
Dodge Dakota
JOIN HERE
12/14/2013
18:21:11
| RE: timing a 4.7 motor
IP: Logged
Message:
Yes, you f-up!
|
Seafomer
Dodge Dakota
JOIN HERE
12/14/2013
19:27:34
| RE: timing a 4.7 motor
IP: Logged
Message:
Can't be much of a shop if they don't know. Push your truck out of that garage as fast as you can.
|
Jason Zabel
Dodge Dakota
JOIN HERE
6/25/2014
01:14:02
| RE: timing a 4.7 motor
IP: Logged
Message:
I have a 02 Dakota sport 4.7 v8 and I'm having trouble with the
timing. I need all the help I can get
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
