| From | Message |
318 Dakota
Dodge Dakota
JOIN HERE
4/19/2002
23:00:01
|
 Subject: RE: R/T 1/4 times?
IP: Logged
Message:
will someone answer a question for me plz.. my axle ratio is suposidly 3.92 but i get a one wheel wonder. does anyone else have a sport 318 with 3.92 axle and no possy ?
|
RTDKOTA
Dodge Dakota
JOIN HERE
4/19/2002
23:00:39
| RE: R/T 1/4 times?
IP: Logged
Message:
I've run a 14.3 at Carlsbad under 70 F temps, and at Firebird at around 85 F temps... It doesn't seem too sensitive to temps right now (at least in that range).
I've got heads coming-- Anyone want to help install heads/cam in SO. CAL?? The day we do it, we've got to install 1.7s and an M1 in another RT at the same time... F F FU FU FUN FUN!
256 hp-- we need more power (275-285 would be nice...)
|
rtdkota
Dodge Dakota
JOIN HERE
4/19/2002
23:03:10
| Peg legger
IP: Logged
Message:
There's got to be some out there... 3.92 is an optional ratio for the rear gear, and unfortunately so is a sure-grip, anti-spin, whatever it's call today. You can get a TRAC-LOCK for it though-- and have a better locking rear end that the stock unit.
|
318 Dakota
Dodge Dakota
JOIN HERE
4/19/2002
23:07:26
| RE: R/T 1/4 times?
IP: Logged
Message:
So the limited Slip is not standard on the 3.92 axle ratio ? that sucks how can i change that besides changing rear ends or welding the spider gears together :) (i dont feel like changing an axle dayly)
|
kota on 20s
GenIII
4/20/2002
02:30:09
| RE: R/T 1/4 times?
IP: Logged
Message:
rtd, i'd like to help ya, but i have never done a cam swap and would probably be looking more than watching. i did my 1.7's and M-1, but you could probably do it quicker than me, so again i'd probably get in your way.
just out of curiosity, where do you live (nearest freeway) and when are you doing the work?
also, i probably asked you this before, but how are you going to smog your truck with the cam?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
rtdkota
Dodge Dakota
JOIN HERE
4/20/2002
03:07:29
| RE: R/T 1/4 times?
IP: Logged
Message:
Smog? What's smog? :P
Just like the M1, I'll probably have to do a swap to get it to pass. That's worst case. Best case, if the computer doesn't freak (it shouldn't, this is a mild cam) then I may have a good chance of passing-- that's what everyone is thinking). Not to worry, I have until 2005 before I have to be inspected anyway-- Or I could get a PO Box in Blythe and not even have to be tested!
DOH!
(I'm in San Diego)
|
kota on 20s
GenIII
4/20/2002
03:12:25
| RE: R/T 1/4 times?
IP: Logged
Message:
i was thinking of getting a po box in AZ. do ya think it would fly with the dmv? do you know if anyone has done this?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
318 Dakota
Dodge Dakota
JOIN HERE
4/20/2002
10:58:37
| RE: R/T 1/4 times?
IP: Logged
Message:
I live in Hillsborough County FL. 2 eyars ago we had them here i simply got a Polk County (witch is the county east of mine) P.O. Box and never went through them....so the idiots in FL u can pass it by but then again were the ones who screwed up the voting the CAL state ppl may be a little sharper
|
kota on 20s
GenIII
4/20/2002
12:10:06
| RE: R/T 1/4 times?
IP: Logged
Message:
LOL thanks
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
318 Dakota
Dodge Dakota
JOIN HERE
4/20/2002
12:16:48
| RE: R/T 1/4 times?
IP: Logged
Message:
No prob they stoped them here what i dont understand is in one county u have to do it then if u drive a half a mile to then next u dont... dont we share the same o-zone and air ????
Just a thought.......
|
| | <<Previous Page P 2 Next Page>> |
