| From | Message |
nowor2l8
Dodge Dakota
JOIN HERE
1/22/2005
12:09:29
|
 Subject: antifreeze change
IP: Logged
Message:
how do I get to the pitcock on a 01 dakota?
|
.boB
Dodge Dakota
JOIN HERE
1/22/2005
12:28:56
| RE: antifreeze change
IP: Logged
Message:
It's really easy. On the drivers side front fascia there's a square hole that looks like a tow hook would fit (but doesn't). If you look in that hole, you'll see a loop of rubber tubing and a round dial-looking object.
Pull the top half of the rubber tubing loop off it's stub, and aim it towards the bucket.
Grab the dial looking thing with a pair of pliers, and gently pull straight out. You'll feel the "click" when it does. Spray a little penetrating oil behind the dial (WD-40 is not a penetrating oil). Now rotate the dial counterclockwise about 190-200*. It should drain in to the bucket.
|
nowor2l8
Dodge Dakota
JOIN HERE
1/22/2005
12:41:16
| RE: antifreeze change
IP: Logged
Message:
Thank you very much.
Now I can put the front end back on the truck.
By the way, next is the ATF change. Any other "like" tips that can save me some time and trouble?
John
|
nowor2l8
Dodge Dakota
JOIN HERE
1/22/2005
13:30:33
| RE: antifreeze change
IP: Logged
Message:
I found the drain and got about 1 gallon of drainage, any suggestions on how to encourage the release of the remainder?
|
Ted
Dodge Dakota
JOIN HERE
1/24/2005
12:41:10
| RE: antifreeze change
IP: Logged
Message:
Buy a Prestone flush kit or the like. They are only like $5 at Wal-mart. You will be amazed what comes out.
Ted
|
Joe G
Dodge Dakota
JOIN HERE
1/24/2005
18:03:13
| RE: antifreeze change
IP: Logged
Message:
If you have a 4.7, there is a drain plug on the block you have to remove to get the rest.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
