| From | Message |
Qwick4.7
Dodge Dakota
JOIN HERE
1/20/2005
12:19:30
|
 Subject: FS: 4.7 Superchips Programmer
IP: Logged
Message:
The 4.7L Superchips Programmer just came out on the market.
Mine is for sale
NIB $300 + shipping
Email me at KotaGirl22@aol.com if interested
"Get more power from your Dodge and Jeep product and a "substantial increase in throttle response"!
The TriTune Max MicroTuners allow the end user to custom tailor their desired performance level to the specific driving task at hand. 87 Octane / 91-93 Octane Performance Tow Program and 91-93 Octane Performance Program.
User adjustable options:
• Increase rev limiter
• Raise top speed limiter
• Calibrate for changes in tire height
22.5 to 42 inch in 1/4 inch increments
Power Gains
+22 HP
+19 ft/lbs Torque
http://www.superchips.com/html/products/chrysler/47truck/47gas_trucks.htm
|
GraphiteDak
GenIII
1/20/2005
12:40:33
|  RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Ok I've heard MIXED stories.
So you are saying that YES the rev limiter can be raised??
If I could move it up 500+ or so I'd be happy.
Wonder if the gains for a 4.7 with cams and TB mods would be even better?
|
Lurkin
Dodge Dakota
JOIN HERE
1/20/2005
13:19:13
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Rev limiter is _not_ adjustable on the SC for the 4.7. SC's marketing BS on the site and box note it, but then say "not all items are adjustable on all engines", or some such.
|
Idakota
Dodge Dakota
JOIN HERE
1/20/2005
14:06:02
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
I have the SC programmer on my truck and as far as I can tell the rev limiter is gone. I've reved it up to 6 grand and nothing kicked in. This is with a manual transmission. Before I programmed it the rev limiter was around 5,500.
|
Qwick4.7
Dodge Dakota
JOIN HERE
1/20/2005
14:22:28
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Do you honestly think that our trucks continue making power around 5,500 RPM?
i dont think so
|
Qwick4.7
Dodge Dakota
JOIN HERE
1/20/2005
14:25:46
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
My truck revs to 6 grand no problem
there really is no reason to go past that
|
Idakota
Dodge Dakota
JOIN HERE
1/20/2005
20:12:34
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
My truck pulls well up to 5500, Im hoping once I install my 70mm TB it will pull hard up to 6 grand.
|
Qwick4.7
Dodge Dakota
JOIN HERE
1/21/2005
00:11:28
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Still for sale
|
MoFinWiley1
Dodge Dakota
JOIN HERE
1/21/2005
17:35:59
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Yes there is a reason to go past that!!!!!
72mm F&B, KRC 218/218, cowl intake, deleted precats and aftermarket y pipe, WITH a SuperChips on the way.....It had better raise the limit cuz i want at least 6500 out of it LOL.
Steve
|
TexasTodd
Dodge Dakota
JOIN HERE
1/21/2005
18:53:51
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Hello,
I don't think 'kotagirl' has installed this SC programmer. I have. Like said, the 4.7 has no option for the rev. limiter. It's still there on my manual tranny, on any of the three programs. It does raise the speed limiter, on the dyno mine was way off the speedo in 4th at 6 grand. Before mine was ~115mph.
Graphite,
did you see my dyno run on the performance board, and what it's making at 6grand?
|
Qwick4.7
Dodge Dakota
JOIN HERE
1/21/2005
19:31:54
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Texas Todd...
so you like the Programmer and would recommend it to others?
|
TexasTodd
Dodge Dakota
JOIN HERE
1/22/2005
00:58:58
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Quik,
I tried it cause it was the only thing so far that dynoed a difference as far as programming for my 01, 4.7. A difference, yes.
Recommended it? Well, At least it does something.
|
GraphiteDak
GenIII
1/22/2005
19:17:33
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
MoFinWiley1 I'd like to get some more agressive cams like yours in the future. I've just got the HO cams (200's) and a ported 68MM and mine pulls right to the 6K stock limiter and feels like it was still pulling!
This engine should rev to 6500 easy with a better cam and valve springs!
On KRC they have build ups all engine that run towards 7K making power.
Todd. I saw the dyno. Don't remember the powerband off the top of my head. Are you going to say your power DROPPED off by 6K?
I dunno. I've HAD small blocks that I revved to 7K before. I guess I kind of miss that.
|
Dan
Dodge Dakota
JOIN HERE
1/23/2005
00:52:13
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
GraphDak,
Here you go. I got the superchips tuner for the 4.7 Dakota. I have a 2003 Club Cab, with the 4.7 like I said. I installed the program for the performance (the most aggressive). It gave me the option to raise the rev limiter either 250 or 500 rpm. It says it in the instruction manual and also gives you the option when installing it. I do not know if you can raise it for the towing or 87 octane options, but rest assured you can for the performance option.
Dan
|
TexasTodd
Dodge Dakota
JOIN HERE
1/23/2005
10:50:58
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Dan my instruction manual said that too, but when I installed it on my 01 4.7 manaul tranny, it says no option for the rev limiter raise.
Interesting that in fact if yours will and mine won't, what's up with that?
|
GraphiteDak
GenIII
1/23/2005
18:45:15
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Dan, is yours an auto?
maybe the limit is unadjustable on the manual because of clutch material RPM limitations???
just a thought.
One time in my Mustang i shoved it into the wrong gear when doing 80MPH. It had a t-5 tranny. Well, the RPM's shot so high the clutch material flew off the clutch disk!
|
Dan
Dodge Dakota
JOIN HERE
1/23/2005
23:05:49
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Texas,
Which program did you install? When I installed the performance program, it let me raise it. If yours does not then you might have a bad programmer.
Graph, I have a manual transmission.
Dan
|
GraphiteDak
GenIII
1/23/2005
23:54:08
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Now this is interesting.
I'd still be intersted in possibly getting a programmer. They still going for around $300?
Gonna have to be a while. This is not exactly my "RICH" time of ther season and we're trying to save some money to get two new ATV's for our kids who outgrown what they had.
Plus, I kind of wanted my 4.10 gear swap to be my next project. Although, if I ALREADY had the programmer I'd be set to calibrate my speedo when I DID the gear swap.
Hmm....
|
Dan
Dodge Dakota
JOIN HERE
1/24/2005
00:33:33
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
Graph,
A little off topic, but have you done anything to your injectors? I have seen a lot of posts where people are talking about it. I have just put on a k&n intake and catback along with the programmer. Do ya think getting a better set of injectors will help any? Also, I noticed you put on an electric fan, any help there? Have you considered an underdrive pulley set?
Dan
|
Lurkin
Dodge Dakota
JOIN HERE
1/24/2005
16:05:36
| RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
I saw on another board that the programmer supposedly raises the rev limiter by 400rpm over stock in the Perf program. According to the source at SC, it's not a question during the program install though.
I know my rev limiter cuts in at 6100 rpm, when I get my programmer back (in the next year or two apparently...) I'll find out if my limiter is higher or not.
|
Brian hicks
Dodge Dakota
JOIN HERE
1/24/2005
16:51:15
|  RE: FS: 4.7 Superchips Programmer
IP: Logged
Message:
I was wondering is it even worth spending that kind of money for something thats only going to raise the horsepower 15 to 22. That seems sinceless. I have a 00' 4.7 and I ran a 14.7 with just an exhaust and a intake. (new plugs and relocated the IAT sensor). Now I have a Hurst short throw, Gibson headers, Jet stage 2, helix spacer, lowered 3-5, now runinng a 100 shot of nos. have not ran since the mods. I want to do a manifold swap and cams. How to do?
Thank you for your alls time Superb
|
| | P 1 Next Page>> |
