| From | Message |
Mikes99Dakota
GenIII
12/29/2004
01:29:33
|
 Subject: Jeremys 3.7L vs. Mikes 5.2L
IP: Logged
Message:
Well I was kinda curious on how Jeremy does
on his 40 punch! He tells me that he pulls on
a HEMI almost a truck length when he
punches it around 4800 rpms. That it a weak
spot for a HEMI. This is also not my strong
point either since im at around 26-2700 rpms
and we tested this out since I got good low
end and he has good high end.
We started at 39-40 mph and got on it and by
the time he hit 55 he was a 1/4 of a truck in
front. He shifted to 3rd and I pulled back. By
the time we hit 110 mph I was only 3/4 truck in
front maybe a little less than that.
Obviously he is proud of his SOHC V freaking
6. Im not hating im congratulating for hold with
my slightly heavier V8.
His mods are: CAI, 3.92s and Suregrip
My mods are: CAI, Shift Kit and stock open diff
w/ 3.55s
Now How badazz is his V6 if I pulled on a CC
R/T about this much from 45 mph??
Just thought I would give out some more great
info on the new 226 cu in V6.
Mike
1999 RC Auto 5.2L
Flowmaster 40 series, Homemade CAI, Shift Kit
Track Times: 60' - 2.188
1/8 - 9.75 @72 mph
1/4 -15.42 @ 89 mph
|
ZoSo
Dodge Dakota
JOIN HERE
12/29/2004
08:00:30
| RE: Jeremys 3.7L vs. Mikes 5.2L
IP: Logged
Message:
Why dont you two hook up some chains and let us all know the results of that?
|
bullsheet
Dodge Dakota
JOIN HERE
12/31/2004
11:44:38
| RE: Jeremys 3.7L vs. Mikes 5.2L
IP: Logged
Message:
4800 rpms. That it a weak spot for a HEMI. there is no way a 200 hp 6 with a 40 hp "shot" is going to outrun a Hemi at any speed. I offer up my 300C and any paved road or track you select as a race challenge/venue. at 4800 rpm mine is putting out over 330 hp and 380 lbft torque. that is quite far from a "weak spot" would you not say?
|
jasonsdakota
Dodge Dakota
JOIN HERE
1/01/2005
22:02:30
| RE: Jeremys 3.7L vs. Mikes 5.2L
IP: Logged
Message:
wow, what a v6
|
Mikes99Dakota
GenIII
1/03/2005
02:23:47
| RE: Jeremys 3.7L vs. Mikes 5.2L
IP: Logged
Message:
Chill Out!! I was refering to Jeremys RPMS at
4800. What I mean a weak spot is where the
Hemi shift point is and its about 40 or so. I
guess I forgot to mention a HEMI TRUCK!!!
Sorry about the confusion but maybe that will
clear up some questions!!
Mike
1999 RC Auto 5.2L
Flowmaster 40 series, Homemade CAI, Shift Kit
Track Times: 60' - 2.188
1/8 - 9.75 @72 mph
1/4 -15.42 @ 89 mph
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
