| From | Message |
Ken
Dodge Dakota
JOIN HERE
12/10/2004
13:03:28
|
 Subject: Cleaning Injectors
IP: Logged
Message:
I have got my hands on an ultrasonic cleaner, and i was wondering what kind of solution i should clean my injectors with. I want to take my injectors out of my truck and clean them this weekend. Any help will be appreciated.
Ken
1992 Dakota LE 5.2L
Give me fuel, give me fire, give me that which i desire
|
Izzy
Dodge Dakota
JOIN HERE
12/13/2004
10:46:26
|  RE: Cleaning Injectors
IP: Logged
Message:
...and I bet you doon't live anywhere near Central Florida do you?
I would rather clean mine also since I can't get anyone here to answer my questions about "other than stock" replacement injectors.
|
Tony
Dodge Dakota
JOIN HERE
12/13/2004
20:02:33
|  RE: Cleaning Injectors
IP: Logged
Message:
Izzy,
Try replacing them with F*rd injectors. They have a much better
tolerance than stock. If I remember right, OEM (dodge) is 5%-8%
tolerance & F*rd is like 1%. That's alot even with 19# injectors.
Try Ebay or Summit. Got mine (new) from ebay for my Dak & my chebby
impala. Don't remember how much. but cost less than from a speed shop.
|
Deep Purple
*GenIII*
12/14/2004
08:06:57
| RE: Cleaning Injectors
IP: Logged
Message:
You might ask a jewelry store about what liquid they use. Don't use any gas or other fuel till you know what is best. That is a good idea about cleaning but to pay for a cleaning, it is about as cheap to go to FMS injectors. That's what I did and they work fine. Good luck.
|
Izzy
Dodge Dakota
JOIN HERE
12/14/2004
14:42:07
| RE: Cleaning Injectors
IP: Logged
Message:
I am hoping someone that has replaced theirs with FMS 4-hole injectors could post part numbers so I don't but the wrong injectors.
I am waiting on HO Cams right now and would like to switch the injectors at the same time.
I have combed Ebay and see all kinds of 19# injectors listed but with obvious differences in physical size and length. I just want to make sure I get the right stuff the first time.
|
Tony
Dodge Dakota
JOIN HERE
12/14/2004
22:57:46
| RE: Cleaning Injectors
IP: Logged
Message:
Bosch - (Ford propriety) design 2 injectors
19 lb/hr flow rate
That's from the later model rustang. The others
are for the Clown Vics & other furds.
They'll look like the ones on the magnum - just
with yellow tops. The ones I got were for the
5.slow mustang 94-97. IMO, I recommend getting
them new from wherever you get them.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
