Forums
Forum Tools
|
 |
07:46:43 - 11/17/2024
V8 Dakotas
| From | Message |
Confused
Dodge Dakota
JOIN HERE
11/26/2004
10:57:50
|
 Subject: Gibson Header Install Problem
IP: Logged
Message:
I was putting in my new Gibson headers and the driverside header touches the brake booster and does not line up with the y-pipe, the passenger side installed fine. From looking through posts it sounds like people had similar problems with other brands, but not Gibson. As far as I can tell, I bought the right headers to fit my truck, but I could be wrong. Also, I had to install a new y-pipe because it was cracked, but the new one appears identical to the original, so I don't think thats the problem. I know this sounds like a stupid question, but is there something I'm missing here, the headers should fit, or did I recieve the wrong header for my truck. Its a 1997 318 4x4 manual.
|
b1llyw
GenII
 
11/26/2004
10:59:48
|  RE: Gibson Header Install Problem
IP: Logged
Message:
What part number did you get? I believe you should have a GP301 or GP301S (stainless).
I'd bet on the y-pipe. The Gibson's are designed to fit to the factory y-pipe. If that's not what you have, it's the most likely problem.
Bill White - KRC Performance
'95 CC 4x2 - 408, 5-speed, 8 3/4
'04 Liberty, 4x4, 3.7, 5-speed, LSD
|
Randy
Dodge Dakota
JOIN HERE
1/01/2005
14:19:26
| RE: Gibson Header Install Problem
IP: Logged
Message:
I just installed a set of gibson headers on my 97 318 4x4 had the clearence proplem with the power boster. Solved it by lightly kissing the problem area with a torch and ball pean hammer, fixed the problem fit great. Didnt have problem with y pipe. good luck Randy
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
