From | Message |
altays Dodge Dakota JOIN HERE
10/04/2004 22:57:06
|
Subject: Guages IP: Logged
Message: Can someone tell me how to wire up an aftermarket oil pressure and water temp guage on a 2002 CC Dak 4.7 V8.Iwant to use factory guages also.
|
? Dodge Dakota JOIN HERE
10/05/2004 08:18:50
| RE: Guages IP: Logged
Message: why? are you in need of these gauges? for what reason?
|
slow2dak Dodge Dakota JOIN HERE
10/05/2004 08:59:15
| RE: Guages IP: Logged
Message: those 2 guages are easy. you need to build an adapter out of brass fittings that are avail. at your local hardware store. for the oil pressure guage, build a "T" that will screw into the oil pressure port where the original sending unit goes. screw your original sending unit into one side and your fittings for the aftermarket guage into the other. its very simple. do the same thing for the temp guage. oil pressure sending unit is just above where the oil filter sits, and its brass. the temp sending unit is just in front of the intake manifold. if you look in between the alt and ac its there in the front top side of the block. if you need mech. help ill build one for you and tell you what fittings you need.
02 4.7/Auto RC Sport
3.55 and a one legged wonder
2 1/4" True Duals, Flowmaster Mufflers, no tailpipes or dumps
tps .701
relocated IAT
Adjustable ECT sensor
K & N drop in
Removed rubber flap
Adjustable LPS
All on street tires
Best 1/4: 14.96 @ 90.52
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|