| From | Message |
IOWABOY
Dodge Dakota
JOIN HERE
9/05/2004
06:43:15
|
 Subject: mileage
IP: Logged
Message:
YEAH!! Gotta love it . 92 Dakota rolled over 200k today. Shootin' for 3.
|
mcarthey
Dodge Dakota
JOIN HERE
9/05/2004
10:31:26
| RE: mileage
IP: Logged
Message:
Congrats! Any aftermarket engine work done to it?
|
matwood
Dodge Dakota
JOIN HERE
9/06/2004
18:00:18
| RE: mileage
IP: Logged
Message:
wow, my 94 only has 85K.
|
jb
Dodge Dakota
JOIN HERE
9/06/2004
20:49:41
| RE: mileage
IP: Logged
Message:
what kind of maintenance have you done throughout the 200000 miles? i would like to get that kind of miles out of my truck.
|
Webb
Dodge Dakota
JOIN HERE
10/17/2004
12:39:03
| RE: mileage
IP: Logged
Message:
I got a 91 3.9 with 204,669, and shes still rolling strong
|
eric
Dodge Dakota
JOIN HERE
10/17/2004
18:50:06
| RE: mileage
IP: Logged
Message:
my 93 3.9 rolled over 200,000 about 3 weeks ago. Still runnin strong.
|
Sneezer
Dodge Dakota
JOIN HERE
10/18/2004
09:45:03
| RE: mileage
IP: Logged
Message:
92 318, 188k miles right now. Regular maintenance. Replaced the following items - power steering pump, starter, water pump, radiator cracked at the top cover, ignition key lock, blown belly gasket repair, EGR valve and Cat replaced last year, replaced U-joints. Transmission rebuilt at 120k miles. Had broken motor mounts once.
I have the following mods, all installed in the last 6 months - M1, ported TB, MSD6AL, Blaster SS coil, MSD plug wires, K&N filter, Mopar PCM.
Following is waiting to be installed - 4.10 gears, LSD, 1.7 rockers, electric fan, underdrive pulleys.
These are the current maintenance items that need to be addressed right now - complete front end overhaul - ball joints, bushings, tie rod ends. New shocks on all 4 tires, power steering pump is beginning to leak (needs rebuild kit), exhaust and muffler are rotting out, O2 sensor is bad, valve covers are leaking oil (minor leak). Inspection is coming up in Nov so the exhaust will be addressed first. Hopefully the front end work can be completed during the winter, money permitting.
Planning on putting new springs and valve seals in when the rockers go on. Valves as well if needed. If I have the time I might try and get the stock heads ported, but not a priority right now.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
