Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:14:06 - 12/20/2024

V8 Dakotas
FromMessage
plr7
Dodge Dakota
JOIN HERE
 Email

7/30/2004
01:11:10

Subject: trouble codes p0136, p0031, p0051
IP: Logged

Message:
I have 2001 quad 5.9 4x4, about a week ago i noticed the engine light was on, i did the key on, key off thing and got three codes p0136, p0031, p0051, i reset the computer and the p0136 code comes almost immediately, the other two come after a few miles of driving. i looked around (allpar, obdii) and found these are broken or shorted sensor codes. the p0136 code is bank 1 sensor 2, which i am assuming is the driver side sensor after the pre cat. since i haven't had a code for the passenger side after the pre cat, i swapped the two and reset the computer to try and get a code for the bank 2 sensor 2, but i still get the p0136 code. there are four sensors in all one before the pre cat and one after the pre cat on both sides, and nothing on the catalytic converter itself. is there something that all these sensors have in common? i have had the exhaust done, a B&G flash, araid intake, 180 thermostat, accel coil, autolight plugs,IAT sensor to the intake tube, and all the other tips and tricks i have read about here, so i am not itching to take to a dealer so they can tell me it's my fault, but haven't done anything in the last year or so. i haven't noticed a difference in mileage or performance, but that engine light is driving me nuts. ANY help would be appreciated
thanks in advance



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.