From | Message |
Blakota2001 Dodge Dakota JOIN HERE
7/22/2004 02:23:30
|
Subject: 4.7 Air Hat IP: Logged
Message: Anyone have a 4.7 air hat they want to part with?
|
2THEXTRM GenIII
7/24/2004 15:46:09
| RE: 4.7 Air Hat IP: Logged
Message: I have two, email me, Bobolama2@yahoo.com and we can work something out. Bob.
Vortex dual 3 inch cat back, Volant Intake, Poweraid TB Spacer, full synthetic fluids 4 inch Rancho/3 inch Body Lift, 35/12.50-17 Xterrains on 17x10 AR Atlas, Rancho 9000x's Grizzly double/single rollbar with (6)Hella's, Manik Nerfs/Tailight Guards, Line-X, Hard Work & $$$$$$$$$$
|
TexasTodd Dodge Dakota JOIN HERE
7/24/2004 17:23:45
| RE: 4.7 Air Hat IP: Logged
Message: Blackota,
do tell why. Either you're selling yours and want to put it back to stock, and misplaced yours,
or
You have some rad mod ideas for it. If this is the case, I'd like to hear about your ideas for using the stock air hat.
I've got mine on a shelf, but will probably keep it, Just in case, I sell it and want the motor to have that stock look.
|
Blackota2001 Dodge Dakota JOIN HERE
7/25/2004 18:54:42
| RE: 4.7 Air Hat IP: Logged
Message: Gonna try to connect a cone filter directly to it( or as close as possible). Experimenting with results of warmer air low restriction intake versus cooler air higher restriction intake. Just playin' around...
Bobolama, I'll be getting with you shortly.
|
TexasTodd Dodge Dakota JOIN HERE
7/26/2004 17:55:45
| RE: 4.7 Air Hat IP: Logged
Message: Doesn't the 'air raid' do it that way, keep the air hat?
I never thought of my cooler air home brew as higher restriction, never know.
|
Blakota2001 Dodge Dakota JOIN HERE
7/26/2004 19:39:21
| RE: 4.7 Air Hat IP: Logged
Message: Yeah...but looking to get it even closer than that.
|
Lurkin Dodge Dakota JOIN HERE
7/27/2004 10:25:05
| RE: 4.7 Air Hat IP: Logged
Message: Airaid also now sells a tube that replaces the air hat, along with the normal filter and shield.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|