| From | Message |
Jan
Dodge Dakota
JOIN HERE
7/11/2004
17:43:55
|
 Subject: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
Selling the Powerdyne. It's for a 1996 - 1999 Dodge Dakota/Durango 318/360 motor.
The head unit has roughly 10k miles on it. We have added quite a few little things to make it run better, they are listed as follows:
* Basic Powerdyne kit (BD-11A head unit) with instructions ($2749.00 from http://www.superchargersonline.com/product_detail.asp?PartNumber=PD-K10516-101 retail is $3946.00)
* Powerdyne By-pass valve ($129.00 at http://www.superchargersonline.com/product_detail.asp?PartNumber=PD-A10262-011)
* AutoMeter Carbon fiber Ultra Light 2-1/16 Boost/Vacuum, 30in.HG/20 Psi, Mechanical ($54.95 at http://store.summitracing.com/partdetail.asp?part=ATM-4701&N=120%204294925228%204294925227%20300397)
* AutoMeter Carbon fiber Ultra Light 2-1/16 Air/Fuel Ratio, Electric ($61.88 at http://store.summitracing.com/partdetail.asp?part=ATM-4775&N=120%204294925228%204294925227%20300398)
* 6 rib 3.12 4psi (on truck applications, 6psi on car applications) pulley (came with the kit)
* 6 rib 2.93 6psi (on truck applications, 9psi on car applications) pulley ($69.00 list $75.26 from http://www.superchargersonline.com/product_detail.asp?PartNumber=PD-D10045-293)
* 6 rib 2.70 9psi (on truck applications, 11psi on car applications) pulley ($69.00 list $75.26 from http://www.superchargersonline.com/product_detail.asp?PartNumber=PD-D10045-270)
* MSD BTM (Universal) ($169.99 from http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=3096&prmenbr=361)
* S&B Powerstack 7 cone filter ($43.00 from http://www.intenseperformance.com/products/cone_filters/cone_filters.html)
* GS Motorsports Auto-tensioner plate
* Turbonetics Air Hat (bought for $85.00)
* Custom piping from the Supercharger to the air hat with blow-off valve port welded in. (Cost roughly $50 to have made).
* Dual gauge pod for the A-pillar
* Two belts: the 110 for when you want to run the A/C and the 108.5 for when you dont want to run the A/C. Both are of the Polycog type.
* All fuel lines are included, we will number then and draw you a diagram for how we had them run, they are all covered with TechFlex Fire Retardant loom (http://www.techflex.com/revised_site/pages/prodpages/prod_FR.html)
All total this is worth $3480.82 ($4690.34 full retail).
Im asking $2000.00 shipped for the kit (insurance included). Im pretty firm on this price being that its coming with a lot of stuff extra already. I can also give you a link of all of the pictures from when we did the install on the truck.
If you have any other questions or would like to see pictures please email me at: JCSanders@neo.tamu.edu
Thanks!
Jan
|
Jan
Dodge Dakota
JOIN HERE
7/12/2004
08:23:22
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
BUMP!
|
sicminds
GenIII
7/12/2004
08:53:28
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
is the powerdyne even any good? Why are you selling?
click me
|
Jan
Dodge Dakota
JOIN HERE
7/12/2004
12:36:30
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
It's a good kit.
I'm selling it because we decided to go a different route with the truck.
|
Sam_Maston
Dodge Dakota
JOIN HERE
7/12/2004
17:17:54
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
How many times has the unit blown up on you or thrown/shredded the internal belt? Basically I want to know how many times it has gone back to Lancaster, CA and been rebuilt/replaced?
|
Jan
Dodge Dakota
JOIN HERE
7/12/2004
18:22:08
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
never
there are other places besides Powerdyne that will rebuild the head unit for cheaper. They use better belts and bearings as well. I know that there is a place in Dallas that does it.
|
Stalker.
Dodge Dakota
JOIN HERE
7/13/2004
02:24:13
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
hey sup im interested... but could you post the link of the install I wanna know what id be getting myself into.
|
jan
Dodge Dakota
JOIN HERE
7/13/2004
07:55:42
| RE: FS: Complete Powerdyne kit + extras
IP: Logged
Message:
if you want to email me at jcsanders@neo.tamu.edu I will send you the link!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
