| From | Message |
fred
Dodge Dakota
JOIN HERE
6/26/2004
18:30:29
|
 Subject: Clearing trouble codes
IP: Logged
Message:
How do I go about clearing trouble codes on a 2000 dakota Quad 4.7.(Problems were fixed) What are the steps to reset the PCM?
Thanks
|
jb
Dodge Dakota
JOIN HERE
6/26/2004
21:04:00
| RE: Clearing trouble codes
IP: Logged
Message:
unhook the negative battery post on the battery and leave of for about 15 minutes. as long as the problem was completely fixed the code should go away
|
Kowalski
GenIII
6/27/2004
08:29:09
| RE: Clearing trouble codes
IP: Logged
Message:
Or check for codes cycling the key on off on off on - that also clears the code in my 2000.
Lead, follow, or get out of the way
|
Dennis
Dodge Dakota
JOIN HERE
6/28/2004
11:44:41
| RE: Clearing trouble codes
IP: Logged
Message:
You don't have to wait 15 minutes after disconnecting the negative cable if after you disconnect it you turn the key to the start position and hold it there for 10 seconds. I was receiving the famous evaporative system failure codes for a while and that's how I cleared them.
|
Lurkin
Dodge Dakota
JOIN HERE
6/29/2004
09:21:05
| RE: Clearing trouble codes
IP: Logged
Message:
...or go to your local AutoZone, Checker, etc. and have them hook up their OBD scanner, and clear the codes. Keeps from having to reset all the stereo settings, if'n y'awl care that is :-)
|
daddio
Dodge Dakota
JOIN HERE
6/29/2004
09:45:46
| RE: Clearing trouble codes
IP: Logged
Message:
or unplug the PCM. connection closet to the firewall. 10-15 seconds and reconnect.
|
confused
Dodge Dakota
JOIN HERE
6/29/2004
16:16:53
|  RE: Clearing trouble codes
IP: Logged
Message:
Why wouldn't you do it the way Kowalski suggested ? You won't have to reset the radio stations that way either.
|
daddio
Dodge Dakota
JOIN HERE
6/29/2004
17:29:28
| RE: Clearing trouble codes
IP: Logged
Message:
kowalski's way doesn't work on my '00.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
