| From | Message |
joey
Dodge Dakota
JOIN HERE
4/24/2004
20:01:48
|
 Subject: tranny bolt pattern
IP: Logged
Message:
i have a 91 dak and it has a v6 3.9 in it and i was wondering if the bolt pattern is the same as the 5.2 the tranny is a 5 speed if it makes a difference
|
gen1dak
Dodge Dakota
JOIN HERE
4/24/2004
22:02:29
| RE: tranny bolt pattern
IP: Logged
Message:
It's the same.
|
joey
Dodge Dakota
JOIN HERE
4/25/2004
11:58:07
| RE: tranny bolt pattern
IP: Logged
Message:
thank you very much maybe you can tell me if it is very hard to put the 5.2 in my truck.. can i just change the computer or do i have to change the whole engine wiring harness
|
gen1dak
Dodge Dakota
JOIN HERE
4/25/2004
12:05:26
| RE: tranny bolt pattern
IP: Logged
Message:
You'll need a crossmember (engine_swaps.com) for the engine mounts if you use an LA 318. A Magnum 318 will mount same as the 3.9. The 5-speed is marginal in strength when behind the V8. If you use the same style induction ('89-'91 TBI on the 318) no wiring changes are necessary.
|
joey
Dodge Dakota
JOIN HERE
5/08/2004
15:16:38
| RE: tranny bolt pattern
IP: Logged
Message:
thanks for the help do i need to change the computer still and also you said the magnum 318 will bolt the same as my tbi 3.9 can i put the 318 tbi on it or should i keep the mpi and can i change the computer to make the mpi work or does it take more than that and the 5 speed you said it is marginal can i make it stronger do they make kits for them cause i would like to keep the 5 speed
|
joey
Dodge Dakota
JOIN HERE
5/30/2004
03:24:41
| RE: tranny bolt pattern
IP: Logged
Message:
so what should i do can anyone read the message above this one and tell me what would work the best
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
