| From | Message |
jake Ratcliff
Dodge Dakota
JOIN HERE
4/19/2004
10:16:37
|
 Subject: gran fury 318 to dakota. will it work?
IP: Logged
Message:
i have an 88 plymouth gran fury that i bought for the 318 that is in it. i was woundering if the 318 from the two wheel drive will bolt up to a four-wheel drive standard 88 dakota trany.
|
gen1dak
Dodge Dakota
JOIN HERE
4/19/2004
11:00:05
| RE: gran fury 318 to dakota. will it work?
IP: Logged
Message:
If it's the V6 Dakota, the bolt pattern is the same as the 318. The crank in the 318 has probably not been drilled for the bushing needed when using a standard transmission, so this would have to be done. The crank bushing/bearing must be in place or the tranny pilot shaft will seize in the crank.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
