Forums
Forum Tools
|
 |
00:13:13 - 12/20/2024
V8 Dakotas
| From | Message |
Sephiroth
Dodge Dakota
JOIN HERE
3/14/2004
19:05:16
|
 Subject: Found my Edelbrock...
IP: Logged
Message:
Well, the local Pep-Boys have a nice 14" Edelbrock air-cleaner assembly that I can attach my crank-case breather to. Thing is, the hose attaches behind the air-filter. That bothers me because on my current setup (stock air-cleaner assembly), where the hose goes into the assembly, the air-filter always gets dirtiest, like sometimes the hose might spit out some oil or something. I'd be worried that if something did come out of the crank-case breather hose that it'd get sucked into the engine and damage it. Can somebody clarify this for me?
|
Sephiroth
Dodge Dakota
JOIN HERE
3/15/2004
15:44:52
|  RE: Found my Edelbrock...
IP: Logged
Message:
OK, I found one that fits the bill. You can see it installed in the pictures below. I couldn't find a 14" that didn't require an adapter and a new 14" air-filter (mine uses 10"), so while looking for an adapter, I came across a 10" x 2" Edelbrock assembly, complete with the hook-up for my crank-case breather! I snatched it up and it works great. I don't like the way the breather-hose comes straight down and then bends (see below), but it doesn't touch the engine and has about 1/4" between itself and the engine, so I'm not sweating it. I'll just keep an eye on it for signs of damage, just in case.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
