| From | Message |
mforren
Dodge Dakota
JOIN HERE
3/14/2004
14:24:38
|
 Subject: missfirring cyd #8
IP: Logged
Message:
99 dakota 5.2 new plugs. wires cap rotor button.. had injestors cleaned.. Would it be possible thats its not getting the right amout of air flow to fire all 8 cylinders!!!! cylinder 8 is the 1 missing the pluig is black
|
jd
Dodge Dakota
JOIN HERE
3/14/2004
18:26:40
|  RE: missfirring cyd #8
IP: Logged
Message:
do compression check
jd
|
mforren
Dodge Dakota
JOIN HERE
3/14/2004
21:26:18
| RE: missfirring cyd #8
IP: Logged
Message:
done it reading good. Whas else would be a good thing to check. Could it possible be a burnt valve.. Any help will be nice... thanks...
|
ticats
Dodge Dakota
JOIN HERE
3/15/2004
07:21:52
| RE: missfirring cyd #8
IP: Logged
Message:
Check the area between the intake and exhaust valves. Hope not but a crack may have developed.
|
ScojoDak
Dodge Dakota
JOIN HERE
3/15/2004
09:37:47
| RE: missfirring cyd #8
IP: Logged
Message:
If it was running fine before the tune up, then you've done something to cause the problem. Most often, people bend the plug tip during insertion that closes up the plug gap. Or perhaps you got crud on it before insertion. Check for a plug wire shorting out too. A new wire can short out too under the right conditions.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
