| From | Message |
mikee
Dodge Dakota
JOIN HERE
2/24/2004
23:23:13
|
 Subject: ROD KNOCK
IP: Logged
Message:
01 r/t just replace heads with 2.02 r/t ,drove it for a week it starts to knock at 2500 rpm,,last year I replace the crank ,main,rod ,cam bearings...this sucks
,,who sells the best bearings that can handle the power...
|
EBL
Dodge Dakota
JOIN HERE
2/25/2004
17:29:12
| RE: ROD KNOCK
IP: Logged
Message:
What kind of power are you making? Heads alone shouldn't give you bottom end problems.
|
R/TBlues
Dodge Dakota
JOIN HERE
2/25/2004
19:20:21
| RE: ROD KNOCK
IP: Logged
Message:
Just curious..... Why did you replace the crank? How many miles where on the engine when you swapped cranks? Is this a stock crank or an aftermarket?
|
mikee
Dodge Dakota
JOIN HERE
2/26/2004
00:57:13
| RE: ROD KNOCK
IP: Logged
Message:
mods are mopar headers, comp cam,1.6 roller rockers,m1 intake,b&g flash,msd 6a cap rotor coil,electric fans,k&n intake......
I HAD 36,887 miles on it no warrenty had bad main bearing, crank had wear in it,,it spon the bearing around.....cause by bad cam bearings, oil was not circleing ..best time with out heads 14.4 1/4..looking for 13 seconds
|
creig
Dodge Dakota
JOIN HERE
2/26/2004
01:46:20
| RE: ROD KNOCK
IP: Logged
Message:
any idea's on a lift kit for a 2001 dakota! sorry no rod knocking here but bad brake rotors
|
EBL
Dodge Dakota
JOIN HERE
2/26/2004
07:52:20
| RE: ROD KNOCK
IP: Logged
Message:
Standard berings should still work. When you pull apart the bottom end I'd look for another problem.
|
rtspeeddemon
Dodge Dakota
JOIN HERE
2/26/2004
12:30:02
| RE: ROD KNOCK
IP: Logged
Message:
I agree there are other problems you are not aware of.
That build up is very mild to say the least and you should get 100,000+ on the bearings.
There are other things wrong for sure.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
