| From | Message |
98Dakota
Dodge Dakota
JOIN HERE
2/23/2004
08:47:06
|
 Subject: 1998 V8 tranny
IP: Logged
Message:
looking at a 1998 4x4 cc V8, with 67,000 miles. when i put it in reverse it "clunked" a little. I know a guy who has an older dodge, and his clunks, but what about the newer ones ? any suggestions ?
|
timberwolf
GenIII
2/23/2004
14:10:52
|  RE: 1998 V8 tranny
IP: Logged
Message:
If it's clunking right when you put it into gear, I would check the U-Joints. That's probably the most common cause.
|
timberwolf
GenIII
2/23/2004
14:11:37
| RE: 1998 V8 tranny
IP: Logged
Message:
Oops, almost forgot. Second check the motor mounts.
|
98Dakota
Dodge Dakota
JOIN HERE
2/23/2004
14:53:41
| RE: 1998 V8 tranny
IP: Logged
Message:
Thx man, i will check that out..also, did u get my email ??
|
gen1dak
Dodge Dakota
JOIN HERE
2/23/2004
21:29:40
| RE: 1998 V8 tranny
IP: Logged
Message:
If that checks out, it's a well-known fact that the ring and pinion will "clunk" once they wear a bit. You can counter this to some degree with a heavier lube oil.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
