| From | Message |
Joel Petkovic
Dodge Dakota
JOIN HERE
2/19/2004
11:03:41
|
 Subject: PCM
IP: Logged
Message:
Help anyone! It's decision time, Jet,Hypertech or Venom. Which one? I don't think Mopar has a PCM for this year
1994 Dakota, 4wd, 5 spd, ext cab, 5.2L
|
b1llyw
GenII
2/19/2004
21:07:55
| RE: PCM
IP: Logged
Message:
Actually, there is a Mopar PCM. I'd definitely go that route. It was the first mod I did on my truck when it was still basically stock. Really woke it up.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
adam
Dodge Dakota
JOIN HERE
2/22/2004
12:25:47
| RE: PCM
IP: Logged
Message:
do they have a pcm for obd2 if so how much is it
|
b1llyw
GenII
2/22/2004
13:15:20
| RE: PCM
IP: Logged
Message:
$275 for OBDI pcm's and $349 for OBDII. They are available for most applications through '00. After that, we have flashes available.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
00R/T CC
Dodge Dakota
JOIN HERE
2/22/2004
17:05:31
| RE: PCM
IP: Logged
Message:
B1llyw: May seem like a dumb question, but can you flash the 2000 and older pcm's as well. Is there and advantage/disadvantage to this over the MP pcm's? Also, what would it cost to have one 'flashed'?
|
b1llyw
GenII
2/22/2004
18:51:06
| RE: PCM
IP: Logged
Message:
We can flash '96 and up. The OBDI pcm's are a little more complicated.
Our Cam Cal flash is $489. We can program more aggressive spark curves, reduced idle fuel trims, raised shift points, deletion of torque management and higher rev limits that go beyond the Mopar calibration. The Mopar pcm is great, the flash is better for some applications and necessary in others. It will allow you to run a motor where a Mopar pcm might falter and save you going to a standalone system.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
