| From | Message |
6lizrd
Dodge Dakota
JOIN HERE
2/10/2004
19:32:44
|
 Subject: new here
IP: Logged
Message:
just found this site late last night, and while reading past posts got some answers to some of my ?'s. i own a 94 ext,cab dakota 4x4, 5.2 with 153,000 miles and it runs good, having not done any work on the motor or accessories! of course my A518 trany been done and tweeked and all ball joints,some steering and suspension work. so in the near future.. i've already purchased rebuilt heads,and might go with '92 stock manifolds(from what i've read)since i like low rpm torqe. just wondering if a 3" y-pipe is available to go with a new 3" cat and pipes. will i be defeating the purpose of back pressure? also a set of injectors have been offered to me but not sure which ones to go with? and finally throttle body? just looking to gain some hp. since i'm going to be keeping it. sorry for all the ?'s thanks
|
b1llyw
GenII
 
2/11/2004
06:40:36
| RE: new here
IP: Logged
Message:
The '92 (and most '93) manifolds are a good choice. Try to get the factory y-pipe with them, otherwise get one made. 3" exhaust will work nice on your truck. A set of FMS (Ford Motorsports believe it or not) 19lb injectors are the ones to shoot for. Last but not least, I'd suggest an F&B 50mm throttle body for your setup. All of the above would give you a nice gain. I am a vendor so let me know if I can help you out!
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
CThomp
*GenIII*
2/11/2004
07:21:11
| RE: new here
IP: Logged
Message:
Hey Bill: Do you guys make custom y-pipes for 2000 4.7L's. I'm looking for one but don't have time to go to an exhaust shop. I only have the one cat. I'm looking to go with a 2.25" to 3" setup so I can run a 3" cat and 3" pipes w/ muffler.
|
b1llyw
GenII
2/11/2004
08:49:17
| RE: new here
IP: Logged
Message:
Sorry, we don't. Check with JBA. They might have something for you.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
gen1dak
Dodge Dakota
JOIN HERE
2/11/2004
11:49:05
| RE: new here
IP: Logged
Message:
Ford Motorsports isn't hard to believe since they're pretty much all made by Siemens Inc.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
