| From | Message |
nosae
Dodge Dakota
JOIN HERE
1/22/2004
20:48:29
|
 Subject: PCM ( what to buy )
IP: Logged
Message:
What is a good PCM to get for my 4.7l 2000 Dakota.
The stock PCM is fried and needs to be replaced.
Also should I go stock or high performance. Where is a good place to get one.
|
MOPAR
Dodge Dakota
JOIN HERE
1/22/2004
21:05:05
|  RE: PCM ( what to buy )
IP: Logged
Message:
U have no choice stock is all there is
|
nosae
Dodge Dakota
JOIN HERE
1/23/2004
14:25:07
| RE: PCM ( what to buy )
IP: Logged
Message:
can u only get one at a dealership
|
kowalski
Dodge Dakota
JOIN HERE
1/23/2004
15:42:24
| RE: PCM ( what to buy )
IP: Logged
Message:
You could get a used one a lot cheaper at carparts.com, but I hear they don't always work in some trucks. I got one for something like $90 to run while I was getting the Leach flash on my original. So since its a 2000, there is a performance option for you.
|
CThomp
*GenIII*
1/23/2004
15:52:53
| RE: PCM ( what to buy )
IP: Logged
Message:
Mike Leach: (714) 639-5220 ($400) or kennebell.net ($349). Also try krcperformance.com but I think they use Mike Leach for the 2000's.
In all cases you have to send in your PCM to get it flashed (a new program). So you have down time on your truck unless you have a seperate stock PCM to run.
|
Rob C
Dodge Dakota
JOIN HERE
1/23/2004
16:44:44
|  RE: PCM ( what to buy )
IP: Logged
Message:
Why is your stock PCM fried? It's covered by an 8 year/80,000 mile warranty. If it got damaged through no fault your own, you should be able to get another PCM under warranty at your local dealership.
|
kowalski
Dodge Dakota
JOIN HERE
1/24/2004
07:26:32
| RE: PCM ( what to buy )
IP: Logged
Message:
Good point - thats the best way.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
