| From | Message |
fizzak
Dodge Dakota
JOIN HERE
12/14/2003
23:20:50
|
 Subject: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
I have a 2002 quad with the 5.9.
Although this truck has the most power in it's class at 250hp, I'm thinking a 360 cubic inch engine should make at least 300hp minimum. I'm thinking the M1 manifold will get me there but I'm concerned about voiding my warranty. What do you guys think?
|
Gen II Geoff
Dodge Dakota
JOIN HERE
12/15/2003
00:20:57
|  RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
The M1 probably won't get you any more than an additional 15-20 hp. It'd be nice to say you could get more, but on a stock engine it won't make that big of a difference. It takes alot of work to get 50 hp.
I have not yet purchased an M1, but it seems to be one of the better mods for high performance engines.
Geoff
|
.boB
Dodge Dakota
JOIN HERE
12/15/2003
11:12:08
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
Geoff is right. On an essentially stock engine you'll pick up about 15-20 hp. If you do the matching mods - better TB, computer adjust, cold air intake - you'll do better. But remember that those gains are at the upper rpm limits, like above 3K. It will seriously degrade peformance for things like off roading and towing. Life's a trade off.
|
Heath
Dodge Dakota
JOIN HERE
12/15/2003
15:37:46
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
Most people I talk to have minimal low end loss with the M1 2BBL, the 4BBL is another matter. I would get the M1 2BBL, TB, Cold Air Intake, and a superchips.
|
gen1dak
Dodge Dakota
JOIN HERE
12/15/2003
19:04:33
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
With the 360's very mild cam specs, you can easily get away (with stock springs) with the added lift some 1.7:1 roller rockers will add. Naturally, I favor a better cam as a foundation, but short of going into the engine, at least the added ratio from the rockers will help. That and the intake are big steps. Uncork that exhaust a bit and you're there. All the other mods mentioned will mean that much more in the power dept. and you can add them in stages.
|
matt
Dodge Dakota
JOIN HERE
12/15/2003
19:26:34
|  RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
okay im still confused about all of this, i have a 2000 R/T and i want the M1 but, do i need the EGR or non-EGR? i live in texas. i was told that a 2000 doesnt have and EGR but im not sure. and if i get this will it now pass emissions? thanx in advance
|
gen1dak
Dodge Dakota
JOIN HERE
12/15/2003
23:23:53
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
Non-EGR. The EGR went away late 90's, thinkin' around '96
|
rtdkota
R/T
12/16/2003
10:21:51
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
I sell these, the 96 and up are NON-EGR-- you can get the EGR, the plates are included to plug the ports, but the non-EGR looks cleaner.
Smog-- it's not a smog legal part.
Will you pass the sniffer? Yes, most likely..
Will it throw codes?? No.
Sam
619-274-1292
www.socaldakota.com
|
Gen II Geoff
Dodge Dakota
JOIN HERE
12/16/2003
13:07:24
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
hey fizzak, if you want to buy one for me, I'll put it on my dak and see how it goes. Then I'll report back to you with whether or not you should buy one.
Geoff
|
ram this
Dodge Dakota
JOIN HERE
12/16/2003
17:36:43
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
the 360 only puts out 250 hp
|
matt
Dodge Dakota
JOIN HERE
12/17/2003
15:11:46
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
are you serious?? no way!?
hey buddy, next time you put some info down about dakotas, make it useful. i mean its not like we own a dodge or anyhting or are enthusiasts, what is this a dakota site?
|
R/TVOLTA
Dodge Dakota
JOIN HERE
8/12/2006
17:19:41
|  HOW MUCH HP NOW
IP: Logged
Message:
I BOUGHT A 2000 R/T DAKOTA WITH HEADERS,MOPAR COLD AIR INTAKE WITH K&N FILTER FLOWMASTERS ,,HOW MUCH HP DO I HAVE,,I MITE HAVE A DIFFF TB AND MANIFOLD IF SO THEN HOW MUCH
|
2002 R/T
Dodge Dakota
JOIN HERE
8/13/2006
15:50:47
| RE: Mopar M1 2bbl EGR Intake Manifold
IP: Logged
Message:
RTvolta ur probally sittin at 225hp at the wheels. i have a 2002regcab R/T with,
M1 2bbl
hypertech
1.7rr
k&n air intake
Mopar headers and ypipe
3inch single spintech exhaust
52mm holley tb
i dynoed 257hp/310tq at the wheels at 85degree weather with 82% humidity. on a better day i could of mostlikely seen 265hp or so.
|
me suba
Dodge Dakota
JOIN HERE
12/20/2018
15:48:16
| IycHlTMhGUIGrVkO
IP: Logged
Message:
fHSyWF You have brought up a very good points , thanks for the post.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
