| From | Message |
R/T man
Dodge Dakota
JOIN HERE
11/05/2003
22:58:22
|
 Subject: I need some help
IP: Logged
Message:
Today I tried to install a T-stat and I had a bunch of problems. The first problem was that I have no idea how to take the plastic shield off by the radiator and I searched for this but nobody explains how to do this. Could anybody help me out? The other thing is that when I loosened the two bolts, I couldn't get the hose with the housing out because of the little metal tab on the housing. Any suggestion or tips will be appreciated.
|
R/T man
Dodge Dakota
JOIN HERE
11/06/2003
20:32:51
| RE: I need some help
IP: Logged
Message:
Nobody knows how to take the plastic off?
|
fatmat789
Dodge Dakota
JOIN HERE
11/06/2003
21:53:36
| RE: I need some help
IP: Logged
Message:
try posting this on the Delphi R/T forums. Since you have an R/T like everyone on that forum site, you will get alot more help. or, just trying posting this on Dakotausa.com. theres alot of helpful folks on that too!
|
.boB
Dodge Dakota
JOIN HERE
11/06/2003
22:24:16
| RE: I need some help
IP: Logged
Message:
If you have a 5.9, then the thermostat is on top of the intake manifold. Just follow the upper radiator hose to where it connects to the engine - it's under there.
|
R/T man
Dodge Dakota
JOIN HERE
11/07/2003
16:14:14
| RE: I need some help
IP: Logged
Message:
I know where the thermostat is but I was just wondering about the plastic cover. I will definatelt look into those sights.
|
Keenerson
Dodge Dakota
JOIN HERE
11/07/2003
19:02:57
| RE: I need some help
IP: Logged
Message:
You shouldn't have to take any plastic cover off. All you do is take the 2 bolts out of where the coolant runs into the intake and there is your thermostat. It is about a 2 min job.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
