| From | Message |
Gut
Dodge Dakota
JOIN HERE
9/17/2003
08:51:15
|
 Subject: gains from mods
IP: Logged
Message:
Please post dyno gains at the wheel for INDIVIDUAL mods. In particular crank pulley, tb, roller rockers, pcm,electric fan, and maybe even modified beer barell. Mainly concerned with TQ figures.
|
Good Luck
Dodge Dakota
JOIN HERE
9/17/2003
10:07:07
|  RE: gains from mods
IP: Logged
Message:
Dyno pulls cost money. You are hoping to find somebody that's spent roughly $450 on separate pulls to isolate each mod and that's just not going to happen.
|
Pat
Dodge Dakota
JOIN HERE
9/17/2003
12:58:14
| RE: gains from mods
IP: Logged
Message:
i work at a shop that has a dyno, so once i do some mods to it i will post them up their, the first should be a new exhaust then a cold air intake, but i need some money to get the parts before hand. So just hold tight for a while
|
Einstein
Dodge Dakota
JOIN HERE
9/17/2003
15:17:46
|  RE: gains from mods
IP: Logged
Message:
For my Tecumsah lawnmower engine, I can't seem to find all those dyno runs right now, but I will and scan them and e-mail to you. NOT
What engine are you talking about? Gut, you got the 4 banger?
Einsteins educated guess:
Crank Pulley-3 hp
TB-3hp
Roller Rockers-2hp
PCM-6-12hp
electric fan-are you going to put it blowing you along?- most daks already have one factory
beer barrell-depends how much tolerance you have, after one beer, you'll probably think you gained 85hp from the above.
BTW:
catback- negative 1hp
CAI-maybe 2hp
front grille guard-negative 6hp
different wheels/tires-negative 2hp
Hope this helps!
|
gut
Dodge Dakota
JOIN HERE
9/17/2003
16:56:04
| RE: gains from mods
IP: Logged
Message:
Serious replies only please. your cooperation will be appreciated.
|
greg cyt
Dodge Dakota
JOIN HERE
9/17/2003
18:11:16
| RE: gains from mods
IP: Logged
Message:
modified beer barrel? come on just get a m1 2bbl for 375 shipped. dont dick around with the beer barrel HEY GUT U DIDNT EVEN SAY WHAT YR DAKOTA AND ENGINE SIZE, are u somekind of moron?
|
Gut
Dodge Dakota
JOIN HERE
9/18/2003
09:01:03
| RE: gains from mods
IP: Logged
Message:
5.2 Sorry I am a complete idiot. I do know that M1 looses way too much TORQUE for my lard ass club cab 94.
|
Gut
Dodge Dakota
JOIN HERE
9/19/2003
17:26:21
| everybody respond
IP: Logged
Message:
List gains from Individual bolt ons. pulley, electric fan, tb, pcm, etc. You may list either e.t. improvement or rear wheel #s.
|
Gat
Dodge Dakota
JOIN HERE
9/20/2003
07:57:58
| RE: gains from mods
IP: Logged
Message:
While the response was humorous, the #'s from Einstein are mostly pretty good.
|
gut
Dodge Dakota
JOIN HERE
9/21/2003
15:34:34
| RE: gains from mods
IP: Logged
Message:
If that were true there would be no use in moding our trucks.
|
janesy
Dodge Dakota
JOIN HERE
9/21/2003
22:31:25
| RE: gains from mods
IP: Logged
Message:
bolt ons, are accesories to provide stress relief for more serious mods, like internal mods.
If you want to get power you will be much more impressed and you wallet will be heavier if you just did a cam and intake swap, or a full exhaust job. Instead of spending a couple hundred bucks on each mod that will give you 2 or 3 horse. My opinion
|
EBL
Dodge Dakota
JOIN HERE
9/22/2003
08:23:59
| RE: gains from mods
IP: Logged
Message:
Or you could go to the junkyard and buy a 360 for $1000.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
