| From | Message |
texas318
Dodge Dakota
JOIN HERE
9/14/2003
21:21:10
|
 Subject: 1996, 318, all help wanted!!!!!
IP: Logged
Message:
HEY, i just got a 96 ext. cab with a 318 and i cant do any engine swaps, but i would love every bit of help that you can give me. I have a friend with a 03 mustang GT, he has to keep in mostly stock to avoid voiding his warrenty but i have to beat him. I have about 3-5K to spend on my dak and really need advise, thanks every one.
|
sprttrk
Dodge Dakota
JOIN HERE
9/15/2003
01:24:30
|  RE: 1996, 318, all help wanted!!!!!
IP: Logged
Message:
i have the same year and everything. first a pcm. then headers and exhaust + high flow cat." flowmaster i perfer" your in a total of about 900.00 you can make your own cold air intake by removing a plastic flap that the tube from the air filter box runs to" need to remove grill to do this, it takes about 15 min" just with these i can take a 4.6 gt. then you can get roller rockers and a mild cam. together these are about 1000.00 installed. with these you should have no prob kickin his ars. let me know how everything goes.
|
b1llyw
GenII
9/15/2003
06:41:48
| RE: 1996, 318, all help wanted!!!!!
IP: Logged
Message:
Check out http://www.krcperformance.com
On the cam page, check out the KRC 206. That would probably work well for what you are looking for in terms of a cam. Make sure you do good plugs/wires/cap/rotor first off. I'd also recommend a 180' thermostat, especially when you add more advance with a Mopar pcm.
Bill White
'95 CC 4x2, SLT - under construction
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
texas318
Dodge Dakota
JOIN HERE
9/15/2003
10:56:14
| 1996, 318, all help wanted!!!!!
IP: Logged
Message:
hey. thanks you two this is really goin to help i cant wait to put this stuff on my dakota, thanks a lot and i will make sure that I inform u on how it goes/
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
