| From | Message |
Demon-Xanth
Dodge Dakota
10/11/2001
12:32:25
|
 Subject: Side exit exhaust
IP: Logged
Message:
I've been looking and have yet to find a catback exhaust that exits out the side behine the wheels. I've seen many that go straight back, but I don't like that.
Any ideas?
'02 4.7 CC 2wd.
|
Andyl
Dodge Dakota
10/11/2001
14:09:36
|  RE: Side exit exhaust
IP: Logged
Message:
Try gibson or borla they both make what your looking for the borla is stainless and more expensive but it sounds sweet go to there web site and you can here a dak on there sound bites
|
Marc 99 R/T
Dodge Dakota
10/11/2001
15:16:42
| RE: Side exit exhaust
IP: Logged
Message:
JBA/K&N make an awesome catback system. I would buy it again and again!!
|
Demon-Xanth
Dodge Dakota
10/11/2001
15:33:05
| RE: Side exit exhaust
IP: Logged
Message:
I've looked, and they have straight back exhausts. Would it be possible to get a shop to bend the pipes when they install a system?
|
Marks DQC
GenIII
10/11/2001
18:24:50
| RE: Side exit exhaust
IP: Logged
Message:
Gibson calls their single side exhaust a "Swept Side" and the dual side exhaust "Dual Sport Truck". They both exit OUT THE SIDE of the vehicle behind the rear wheels. Gibson is available in aluminized or stainless. If you don't see it at first look around a little.
http://www.gibsonperformance.com/index2.html
2001 Dakota Quad Cab SLT , 4.7L, Auto, 3.55 LSD, Garnet Red over Slate, Zaino, Tint, Vent Guard, Gaylords Lid, Hotchkis Springs, Bilstein Shocks, Wet Okole Covers
|
Demon-Xanth
Dodge Dakota
10/11/2001
22:36:57
| RE: Side exit exhaust
IP: Logged
Message:
I had seen that, and both exit out the same side instead of one on either side like I'm looking for (imagine the typical straight back system with the pipes bent sideways)
I'll keep looking, but having a shop bend a straight pipe setup or insert elbows looks like the most probable option.
|
DakotaFan
Dakota Enthusiast
10/11/2001
23:53:53
| RE: Side exit exhaust
IP: Logged
Message:
I went to a shop. Had a flowmaster 40 single in/dual out...and requested the tailpipes exit behind the rear tires. No problem. Cost me $270 for the works.
You really never learn how to swear until you learn to drive...
|
Will
Dodge Dakota
10/16/2001
08:17:52
| RE: Side exit exhaust
IP: Logged
Message:
Ditto on the Flowmasters. For what its worth, when I had this done, I was told it was a Durango setup. --Will
|
Knobbyman
Dodge Dakota
10/21/2001
15:33:19
| RE: Side exit exhaust
IP: Logged
Message:
If you want dual exhaust w/ one pipe comming behind each tire it's going to have to be custom done. Look under your truck and you'll see why. *No room for the pipe on the Drivers side. If the shop could do it it'd be one of a kind though ;-). I was thinking about that setup also... I'd love to see pics if you get it done.
|
bobby
Dodge Dakota
10/22/2001
12:59:17
| RE: Side exit exhaust
IP: Logged
Message:
has anyone got or ever seen exhuast that comes in front of the tires
|
ILLI RT
Dodge Dakota
10/22/2001
14:16:26
| RE: Side exit exhaust
IP: Logged
Message:
I'm pretty sure Spintech has some kind of catback now with it exiting before the passenger rear wheel.
|
Demon-Xanth
Dodge Dakota
10/22/2001
23:06:21
| RE: Side exit exhaust
IP: Logged
Message:
I just looked, I didn't realize that the spare was off centered like it was. There might still be room for one to exit right behind the tire (not the look I want) or it could be done but the bends would be fugly (last bend 2-3" from the end of the pipe). Or a third alternative is to remove the spare.
None of these really sound good to me.
Looks like the passenger side only deal has it.
|
TJ
Dodge Dakota
11/09/2001
03:24:04
| RE: Side exit exhaust
IP: Logged
Message:
spintech has a new cat back exhaust exiting the side in front of the tire but still waiitng on pics of it from a buddy
|
HSKR
Dodge Dakota
11/09/2001
05:42:58
| RE: Side exit exhaust
IP: Logged
Message:
TJ, You've got mail!! Spintech has a side exit before the wheel set up that goes over the fram not under. I have a scan of the flyer saved on my computer if anyone wants it. They offer three cat back systems. All 3" from cat to muffle.r One 3" al the way exiting in stock loactions and using staock pipe after muffler $189.95 2. Side exit in front of wheel single 3" al the way $299.95 3. single 3" to dual 2.5" out muffler exiting with dual tips in stock location.
|
HSKR
Dodge Dakota
11/09/2001
05:43:44
| RE: Side exit exhaust
IP: Logged
Message:
Price of the 3rd system is $329.95
|
ZenDak
Dodge Dakota
11/09/2001
12:58:54
| RE: Side exit exhaust
IP: Logged
Message:
I'm looking to go with a side pipe set up on my CC 4.7. Similiar to what the old Vettes had. Does this sound/look like a bad idea? Anyone tried it?
I was thinking of coming straight off some headers into a cat on each side, then into a side pipe (on each side) which would incorporate a muffler and exit infront of the rear wheels. I would probably put a piece of expanded metal of the step area so I don't burn myself everytime I get in and out.
Sound Cool?
|
Curt
Dodge Dakota
11/10/2001
06:48:38
| RE: Side exit exhaust
IP: Logged
Message:
I also wanted the side exit exhaust (duals). I called and visited a few muffler shops and was told i would have to remove the spare tire, I didn't want to have to keep it in the bed! To make a long story short I found a little shop and the old man told me "no problem". He told me he even had a template, been doing that same thing on daks for a few years.
I got my Flowmaster, single in and duals out (2 1/2) and went back, he was finished in an hour, looks sharp (sounds great and runs better) and the way I wanted it. And he charged me $100
Keep looking for a local shop to do that for you and don't buy the commercial ones, unless you have lots of $$$
'00 4.7 CC auto, Fernco (LOL), Flowmaster
|
Steve Reust
Dodge Dakota
JOIN HERE
9/28/2003
19:11:38
| RE: Side exit exhaust
IP: Logged
Message:
I'm looking for the exhaust/side skirt package that exits in front of the rear wheels and thru the side skirts. I found them two days ago, and now I can't find them anywhere!
|
Aden
Dodge Dakota
JOIN HERE
9/28/2003
22:41:11
| RE: Side exit exhaust
IP: Logged
Message:
OK TRY THIS ,
|
Aden
Dodge Dakota
JOIN HERE
9/28/2003
22:50:56
| RE: Side exit exhaust
IP: Logged
Message:
ok it did,nt work so do a search on posting pics
go to #37 you,ll see a nice pic of my side exit
sad to say its on a v6 but still looks the same
cost me 250 with a dynomax super turbo and the
stainless tip and its over the rail in case
i decide to lower at a later date it was a little quiet at first but i paid another 50 bucks
to have the third cat removed sounds nice now
even for a 6er
|
Steve Reust
Dodge Dakota
JOIN HERE
9/29/2003
09:17:43
| RE: Side exit exhaust
IP: Logged
Message:
I found what I was looking for! It took a little bit of searching thru my history on Internet Explorer, but I found it.
http://www.cervinis.com/NewFiles/DakotaSniperKit.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
