| From | Message |
Frog
Dodge Dakota
JOIN HERE
8/13/2003
22:01:53
|
 Subject: Parts for Sale!
IP: Logged
Message:
All of these parts came of a 98 dodge dakota 2wd RC. If you are interested in the parts, please contat me at ccieguru@sbcglobal.net
Here we go Mopar PCM
ASP under drive pulleys
M-1 intake with install kit
52 MM Holley TB
53 MM Hughes Engines TB
2.02 R/T heads with full port, polish, serdi valve job and all. Flow is 300 at .510 lift. that is all I know.
flow kooler water pump (just put it on)
gibson headers and catback exhaust
4 pirelli scorpion zero 275/55/17's (500-700 miles on them)
MSD 6a ignition
MSD ss blaster coil
autometer air fuel gauge
autometer 2 pod pillar
4.10 oem gears and trac-lok (500 miles)
2400 stall from Martin Saine (500 miles)
bellteh 2" 4" drop kit with nitro active shocks all around
split second box
clear corners
euro tail lamps
sir michaels rollpan ( red )
B&M truck floor shifter still in the box ( brand new )
stage III intense performance cold air intake w/canister
stillen crossed drilled and slotted front rotors
I think that is about it. I also have all the parts that were removed too put these in place ie "stock". I will also be willin to part with the engine (which has 60,000 miles on it, and very strong), and anything else on the truck you want.
It was fun while it lasted!
FROG
|
slow97dakota
Dodge Dakota
JOIN HERE
8/14/2003
03:06:57
|  RE: Parts for Sale!
IP: Logged
Message:
hey how much for the pcm, the locking rear w/ gears and the cold air intake
|
frog
Dodge Dakota
JOIN HERE
8/15/2003
08:46:12
| RE: Parts for Sale!
IP: Logged
Message:
$200 for PCM
trac-lok $175
gears - $75
intake - $175
Gears are OEM 4.10's
|
CThomp
*GenIII*
8/15/2003
08:50:27
| RE: Parts for Sale!
IP: Logged
Message:
Any wheels by chance?
|
LTU Dak
Dodge Dakota
JOIN HERE
8/15/2003
10:07:02
| RE: Parts for Sale!
IP: Logged
Message:
What engine did all these come off of?
|
rt13
Dodge Dakota
JOIN HERE
8/15/2003
13:19:46
| RE: Parts for Sale!
IP: Logged
Message:
how much for the clear corners? i want them, post back or email kota_rt_13@hotmail.com please. also interested in the msd 6a and coil, thanks
|
jdllizard
Dodge Dakota
JOIN HERE
8/15/2003
21:08:18
| RE: Parts for Sale!
IP: Logged
Message:
How much for the M-1 intake? email me jdllizard@neb.rr.com
|
Frog
Dodge Dakota
JOIN HERE
8/15/2003
21:21:56
| RE: Parts for Sale!
IP: Logged
Message:
Here are the prices, and the more you want the cheaper I go. Most everything on the list was bought this year. A lot of it was purchased and installed in the last 3 months.
Mopar PCM $225
ASP under drive pulleys $60
M-1 intake with install kit $250
52 MM Holley TB $275
53 MM Hughes Engines TB $200
2.02 R/T heads with full port, polish, serdi valve job and all. Flow is 300 at .510 lift. that is all I know. $1200 ( I raised the price a little because of how much I have invested. I can get flow #'s if you want)
1.7 RR's (Mopar) $300
flow kooler water pump (just put it on) $50
gibson headers (Chrome) and catback exhaust $150 ea
4 pirelli scorpion zero 275/55/17's (500-700 miles on them) $400
MSD 6a ignition $75
MSD ss blaster coil $30
autometer air fuel gauge $35
autometer 2 pod pillar $25
4.10 oem gears and trac-lok (500 miles) $275
2400 stall from Martin Saine (500 miles) $200
bellteh 2" 4" drop kit with nitro active shocks all around $400
split second box $$125
clear corners $50
euro tail lamps $100
sir michaels rollpan ( red ) $100
B&M truck floor shifter still in the box ( brand new ) $100
stage III intense performance cold air intake w/canister $200
stillen crossed drilled and slotted front rotors $150
The truck only had 62000 miles on it.
Once again. These parts came off of a 98 Red Dakota RC 318. If you have all the stuff from this list. You will see roughly 290RWHP and 297RWTQ
Thanks,
|
Frog
Dodge Dakota
JOIN HERE
8/22/2003
12:51:00
| RE: Parts for Sale!
IP: Logged
Message:
Bump
|
Blair
Dodge Dakota
JOIN HERE
8/23/2003
23:47:30
|  RE: Parts for Sale!
IP: Logged
Message:
Will you take $350 for the bellteh 2" 4" drop kit with nitro active shocks all around, if so I want it.
email me back and let me know,
blair
beyondreality111@aol.com
|
slow97dakota
Dodge Dakota
JOIN HERE
8/24/2003
17:30:13
| RE: Parts for Sale!
IP: Logged
Message:
would the gears and trac lock bolt up and in to my rear end? i have a 97 v6 2wd 5 speed. if so i want them!
|
whippen by ya
Dodge Dakota
JOIN HERE
8/24/2003
18:07:57
| RE: Parts for Sale!
IP: Logged
Message:
How much will u sell Mopar PCM,M-1 Intake,1.7RR,Msd ignition,msd coil,Rotors,cold air intake,TB,Bell Tch drop kit? u can put it up here or send me a email Whippen By Ya@aol.com thanks stephen.
|
PurpleRT
Dodge Dakota
JOIN HERE
10/27/2003
14:38:21
| RE: Parts for Sale!
IP: Logged
Message:
So any of this stuff still for sell? I'd be interested in some of it depending on what is left.
Please reply here or e-mail me at
esblack @ yahoo DOT com
Thanks,
Shawn
http://www.madrt.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
