Forums
Forum Tools
|
 |
00:57:47 - 12/20/2024
V8 Dakotas
| From | Message |
Troy
Dodge Dakota
JOIN HERE
7/28/2003
12:09:27
|
 Subject: 4.7 cam install valve gaskets
IP: Logged
Message:
Do you need to replace the valve cover gaskets when you do the 4.7L HO cam install? Can anyone tell me everything that needs to be replace when doing this job. Any sealers, silicones, gaskets, etc. Thanks.
|
Tracy H
Dodge Dakota
JOIN HERE
7/28/2003
13:36:17
| RE: 4.7 cam install valve gaskets
IP: Logged
Message:
Nothing needs to be replaced if you take your time removing the valve gaskets. They are like a large rubber o-ring and can be easily reused if you don't tear one and gouge it when you take it off.
~Tracy
'00 4x4 SLT QC 4.7 Auto 3.55LSD *My Dak Pics*
3" PA Body Lift, BFG AT 33x12.5x15 on AE 15x8 149's, Cranked Torsion Bars, Gibson Dual Rear Stainless Catback, Stainless K&N Clone Intake, TPS @.78v, Relocated IAT, Powerslot Rotors & Hawk Pads, Autolite 3923's & Stant 180° T-stat, ProComp ES-9000 Shocks, Clear Corners, T-Rex Stainless Nerf Bars ... Mods to be installed: H.O. Cams, Fastman 68mm TB, 4.10 gears
|
Troy
Dodge Dakota
JOIN HERE
7/28/2003
15:32:10
| RE: 4.7 cam install valve gaskets
IP: Logged
Message:
Thanks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
