Gen II Geoff
Dodge Dakota
JOIN HERE
7/14/2003
17:35:16
|  RE: Blower motor
IP: Logged
Message:
I just did mine a few weeks ago, and it wasn't really too bad. It did take quite some time though. you have to take the cover underneath the steering column down, the ash tray, lower dash panel and glove box.
From there you can undo 10 or so small screws that hold on the cover for the blower motor. the motor comes out easily, but make sure you have some way to feed the new power wires for the fan back up because I couldn't push them up around the heater box.
It probably took me three hours to do, but I was BSing with some friends and doing some fiberglass work at the same time. it could probably be done by most people in two. Either way take your time and its not so bad.
Geoff
|
Subject: Blower motor