Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:10:10 - 12/20/2024

V8 Dakotas
FromMessage
NOTSERP
Dodge Dakota
JOIN HERE
 Email

5/28/2003
15:14:12

Subject: Borla Turbo?
IP: Logged

Message:
Hey I am working on a tight budget. The local exhaust shop will install a borla turbo in place of the factory muffler and re use the same tail pipe for $135. I was wondering if anyone has this and what is the sound inside the cab, I have a nine month old daughter and dont want something to loud in the cab. Any thoughs? Thanks



NOTSERP
Dodge Dakota
JOIN HERE
 Email

5/28/2003
15:33:22

RE: Borla Turbo?
IP: Logged

Message:
Almost forgot it has a 4.7L.



CThomp
*GenIII*
 User Profile


5/28/2003
15:35:29

RE: Borla Turbo?
IP: Logged

Message:
Borlas are still a little loud. If you want quiet with performance swap in a magnaflow or gibson. I have a magnaflow #14256 S.S. 2.5" in/out straight thru muffler. Got it from truckperformance.com for $100. Had it welded in for $25.



Turkeyhead
Dodge Dakota
JOIN HERE
 Email

5/29/2003
01:34:38

RE: Borla Turbo?
IP: Logged

Message:
Another option is a Flowmaster 70 series. They are about as noisy (or non-noisy) as the stock muffler, but you should see some small mpg gains and hear a liiiiiiiitle bit of rumble.



gps_jetskier
Dodge Dakota
JOIN HERE
 Email

5/29/2003
08:20:52

RE: Borla Turbo?
IP: Logged

Message:
Anyone got the flowmaster number that would fit the stock exhaust?



Turkeyhead
Dodge Dakota
JOIN HERE
 Email

5/29/2003
09:06:17

RE: Borla Turbo?
IP: Logged

Message:
gps, go to www.flowmastermufflers.com; then click on the application guide and put in the vehicle info, and finally click on the Adobe PDF icon in the right side of the vehicle list. It should bring up a chart of parts and their numbers.



gps_jetskier
Dodge Dakota
JOIN HERE
 Email

5/29/2003
09:08:36

RE: Borla Turbo?
IP: Logged

Message:
Duhh....sorry I asked guys...that was too simple.



Daksmack
Dodge Dakota
JOIN HERE


5/29/2003
17:54:11

RE: Borla Turbo?
IP: Logged

Message:
Just get a glasspack from flowtech. For $25 bucks you can get a 2.5 inch in-out that you can bolt on for less than $35 with the clamps.

Any chambered muffler like borla, magnaflow flowmaster, flowtech, will give some reverb in the cab at certain rpm ranges.

But an insulated muffler will prevent most of that, although they might not flow quite as well as the higher priced chambered mufflers.

Glasspacks are straight through design and flow very well. As Ive mentioned before here, you can install them backwards to up the sound a bit.

Just clamp them and you can try it both ways.



NOTSERP
Dodge Dakota
JOIN HERE
 Email

5/29/2003
19:37:01

RE: Borla Turbo?
IP: Logged

Message:
Thanks I think I will give that a try and save some Bucks. Any problems dealing with the offset?



CThomp
*GenIII*
 User Profile


5/30/2003
13:42:55

RE: Borla Turbo?
IP: Logged

Message:
Magnaflow is not chambered its straight-thru. The part number I gave is an exact swap.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.