Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:22:16 - 12/20/2024

V8 Dakotas
FromMessage
Dodge Freak
Dodge Dakota
JOIN HERE
 Email

4/03/2003
15:13:23

Subject: Auxillary Oil Guage?
IP: Logged

Message:
Id like to hook up an auxillary oil guage in my truck. I want to buy a autometer guage, but i have no clue where to even start hooking it up. I own a 92 dakota with a 5.2 liter. If you guys can help me witht the project, i would greatly appreciate it.



Chris
Dodge Dakota
JOIN HERE
 Email

4/03/2003
15:39:59

RE: Auxillary Oil Guage?
IP: Logged

Message:
keeping the factory gage or no?



janesy
Dodge Dakota
JOIN HERE


4/03/2003
15:54:26

RE: Auxillary Oil Guage?
IP: Logged

Message:
mopar offers autometer guages. Theirs have the crysler hexagon on the face with silver backing, they look awesome. and they are cheaper than the same size white face from autometer.

I have a 93, i mounted mine in the dash. i took out the vent right above the overdrive button and light switch. I had to trim the dash a tiny bit and trim back the pipeing, and it slid right in. I filled in the space around it with a piece of plastic i cut from a tool box(it had i cool texture to it)



janesy
Dodge Dakota
JOIN HERE


4/03/2003
15:56:13

RE: Auxillary Oil Guage?
IP: Logged

Message:
oh ya , put a "t" in the oil sending unit hole and you will still have your stock setup w/ dummy light

have fun



DodgeFreak
Dodge Dakota
JOIN HERE
 Email

4/03/2003
17:36:41

RE: Auxillary Oil Guage?
IP: Logged

Message:
well i kind of wanted to bypass the old one. The one i get id like to do a fresh install. I dont know where to connect the oil line to under the hood, everything else i can do with no prob.




Chris
Dodge Dakota
JOIN HERE
 Email

4/04/2003
10:21:48

RE: Auxillary Oil Guage?
IP: Logged

Message:
the factory sender is at the rear of the engine near the distributor... Kinda hard to get to.



88hemiDakota
Dodge Dakota
JOIN HERE
 Email

4/06/2003
10:17:09

RE: Auxillary Oil Guage?
IP: Logged

Message:
If you feel confident enough just lift you distributor out and then you can reach the oil sending unit.
Simply remove the stock one and reinstall your new adapter (comes with you new after market gauge) then route your hose but watch whnyou uncoil the new hose it will try to kink on you and brake. the rest is in the dash placement.
NOTE: if you pull the distributor carefull to not turn the notch 180 degrees out.

Install. is easier than sounds.



chris
Dodge Dakota
JOIN HERE


4/06/2003
10:45:53

RE: Auxillary Oil Guage?
IP: Logged

Message:
you will need a oil pressure sending unit socket, you can get it anywhere and on my 93 you don't need to take out the distributer. just use a long extention on the socket. To bypass the old unit, you will have to remove the light bulb from the oil dummy light on the dash or it will be on all the time.

the sending unit is about 3" long and is black right directly behind the intake manifold



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.