| From | Message |
Dan
Dodge Dakota
JOIN HERE
3/27/2003
12:57:20
|
 Subject: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
I was curious if anyone has or heard about this intake on the 4.7! I'm deciding to buy it! Just wondering if anyone has any expierence with this brand of intake system. If so..please let me know what u think of it.
|
CThomp
*GenIII*
3/27/2003
13:20:25
|  RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
Not that great from almost everyone i've heard from. Go to 360airintakez.com and get one of theirs. You will have much better results. Even if you have to spend a little extra money its best to spend it on something you will be more than satisfied with.
|
2QK4U
Dodge Dakota
JOIN HERE
3/27/2003
13:50:02
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
I have one on my 4.7L and its not bad. I can't compare it to other like NS intake, 360, or the cheap ones on eBay. My experience with it is quicker throttle response, has nice rumble when getting on it, took 5 mins to install, and about 1-2 mpg better. As for the 10 HP more....I couldn't tell you what 10 more horses would feel like.
|
Texas Todd
Dodge Dakota
JOIN HERE
3/27/2003
14:24:50
|  RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
Heres mine,
Home Depot and K&N drop in special!
True cold air also!
|
Dan
Dodge Dakota
JOIN HERE
3/27/2003
22:36:34
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
Anyone have pics of a airaid intake on a 4.7 v8 in the dakota. Please let me know! Thanks
|
Horbedarn
*GenIII*
3/27/2003
22:41:00
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
I am selling my AirRaid intake system if anyone is interested. Email me at horbedarn@hotmail.com
2000, CC, SLT, 4x4, 4.7, 3.55, Auto
MBRP Dual Exhaust Cat-Back, JBA Headers, 72mm TB, 4" Z-Tube
3923's, 180 T-Stat, IAT Adjuster
|
BlkDakDave
Dodge Dakota
JOIN HERE
3/27/2003
23:25:42
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
I picked up a used one off eBay for $67 and installed it today in about 5 minutes. As mentioned, you get a nice rumble sound when you press on it. I've had the drop in K&N and I made a home brew intake using PVC with a huge 9" cone filter. Using the bottom of the stock box with the Airaid box I feel like I'm getting the best of both set ups. Lots of "cold air" while isolating the filter from hot air coming off the engine and moisture while driving in the rain. I am also impressed with the quality of the materials used for the tube, box and rubber.
I'll snap a few pics and send post them over the weekend.
|
fastdak
Dodge Dakota
JOIN HERE
3/27/2003
23:34:03
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
i spent the money and got the K&N fipk. sounds mean as hell. only get 7.3 h.p. more. thats all according to the dyno chart that came with it.
|
fastdak
Dodge Dakota
JOIN HERE
3/27/2003
23:35:20
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
i spent the money and got the K&N fipk. sounds mean as hell. only get 7.3 h.p. more. thats all according to the dyno chart that came with it.
|
2QK4U
Dodge Dakota
JOIN HERE
3/30/2003
01:45:32
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
Here is pic of my set-up:
http://www.dodgetruckworld.com/gallery/2QK4U/81454.jpg
(if pic doesn't work below)
|
BlkDakDave
Dodge Dakota
JOIN HERE
3/30/2003
19:17:32
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
Another pic showing the stock box. Plus one of my truck w/o my Leer topper
http://photos.yahoo.com/blkdakdave
|
andrew
Dodge Dakota
JOIN HERE
3/30/2003
20:35:40
| RE: AIRAID Intake System for 4.7 V8
IP: Logged
Message:
the airaid intake for the 4.7 isnt worth the $150, when the engine is cold it works decent, but since its open, when the engine heats up all it does is suck in hot air and it seems to slow my truck down, i feel i wasted 150 dollars on the intake
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
