| From | Message |
kyle
Dodge Dakota
10/05/2001
05:00:59
|
 Subject: mark III
IP: Logged
Message:
does anyone else have a mark III dakota but mike and i??
|
CW
Dodge Dakota
10/05/2001
09:33:40
|  RE: mark III
IP: Logged
Message:
Not to sound to stupid but what the h*ll is a mark III dakota. I have gen 3 dakota.
|
93markIII
Dodge Dakota
10/07/2001
10:32:12
| RE: mark III
IP: Logged
Message:
I have a 93 std cab markIII, the information i have found out on these trucks is that they were a conversion truck,like a consersion van.i have seen 4 or 5 of these around in michigan all with V8s when i bought mine i was just looking for a genII V8 dakota.
|
dstacy5
Dodge Dakota
JOIN HERE
10/07/2002
16:02:37
| RE: mark III
IP: Logged
Message:
I have a 96 Mark III ext cab with a V8.
|
DaveR
GenII
10/07/2002
17:19:31
| RE: mark III
IP: Logged
Message:
Any of you guys with the Mark III able to point me in the general direction of one of those overhead consoles? Seems like it would be a great place for more gauges and switches.
|
dstacy5
Dodge Dakota
JOIN HERE
10/07/2002
21:54:31
| RE: mark III
IP: Logged
Message:
My Mark III has a overhead console with a light that goes down the length of the cab and a rear power window switch. There is not any room for gauges.
Dex
|
DaveR
GenII
10/07/2002
23:12:29
| RE: mark III
IP: Logged
Message:
Of course there's no room for gauges with that attitude :) I guess the mark III console would be the easy way if I had access to one. But I guess i'll have tom come up with something on my own. Thanks anyway.
|
Stormin
Dodge Dakota
JOIN HERE
10/08/2002
01:09:59
| RE: mark III
IP: Logged
Message:
i used to have a 95 marklll, mine had the running boards, little lights that ran to the x cab, sliding window, woodgrain, and bug shield...(the girls like the light's running down the length of the cab...hehe)
|
Dan Gruber
GenIII
10/08/2002
05:44:14
| RE: mark III
IP: Logged
Message:
There used to be a Mark III place right off I-75 just a couple miles from Ocala, Florida. It closed about a year or so ago...not sure if that was the factory or just a distributor.
Dan
2000 CC SLT 4.7 4X4 Auto 3.92 LSD
3 inch Performance Accesories lift & 32 inch BFG MT KM's
|
94DakotaMark3
Dodge Dakota
JOIN HERE
2/04/2004
21:56:48
| RE: mark III
IP: Logged
Message:
I just got my 1994 Dodge Dakota slt Marklll. Its an extended cad w/ running boards, bed rails and liner. It also has real wood grain, leather, and the overhead console with "Mood Lighting" running the length of the cab. Its got the 5.2Magnum V-8, and can you believe it gets 21mpg highway, 18mpg city.
|
Will
Dodge Dakota
JOIN HERE
2/15/2004
12:34:36
| RE: mark III
IP: Logged
Message:
I've got a 93 Dodge Dakoka Mark III, got rid of the bed rails and put a smoothie cover on it, wood grain, leather, all the options. Just lookin for other people with the same. Feel free to e-mail me.
|
01Motorsport
Dodge Dakota
JOIN HERE
2/16/2004
09:34:50
| RE: mark III
IP: Logged
Message:
Mark III Industries in Ocala, Florida has gone belly up. Not sure when, though.
|
chris
Dodge Dakota
JOIN HERE
2/16/2004
16:39:59
| RE: mark III
IP: Logged
Message:
my 1993 dodge dakota has the mark III thing on it too and it also has the v8 in it its a single cab. it is loaded with every thing leather etc it seems like to me that all mark lll dakotas have v8s does any one have a dakota with the mark 111 with out a v8 and are all of them loaded like mine
|
joe
Dodge Dakota
JOIN HERE
3/30/2004
20:10:44
|  RE: mark III
IP: Logged
Message:
i have a mark III 5.2 v8. i think they all have the v8. but i was wondering if any of you had the same problem. mine has a slight hisitation in the engine like it needs a tune up but everything is tip top. oil changed tune up done. fuel filter changed no exhaust leaks timine set all is good b ut it still misses. can anyone relate
|
Andre
Dodge Dakota
JOIN HERE
4/07/2004
21:23:33
| RE: mark III
IP: Logged
Message:
I have a V6 Magnum 1993 Mark III Dakota. I'm looking for a good place to find Styling and Engine parts for it.
|
Nick Purdy
Dodge Dakota
JOIN HERE
4/24/2004
22:34:35
|  RE: mark III
IP: Logged
Message:
I have a 1994 Dodge Dakota Mark III and I was wondering if anyone knew where i could get a new moter and setup for the power rear window? And yes i have a 5.2L V8 and mine has a problem with a slight hisitation and when it's cold a problem with wanting not to stay running. I have no ideah what is wrong.
|
littled
Dodge Dakota
JOIN HERE
5/08/2004
22:05:36
| RE: mark III
IP: Logged
Message:
nick, if you burn wawa or sheetz gas, try another brand. if not, burn a highr octane. If the problem persists check your intake gasket.
|
carmen
Dodge Dakota
JOIN HERE
5/09/2004
23:12:56
| RE: mark III
IP: Logged
Message:
I have a 94 ext cab 5.2 auto Mark III, I love this truck it drives like a car. I just put a new ox sensor and adjusted the throttle plate and that made my idle problems go away.
You should replace every tune up part before you jump to conclusions, mine still has a slight miss. but runs awsome much faster than my old police car. and i get 19.5 on the higway, 17 city..
the rear window motor looks like a regular door motor mounted to the slide unit. mine needed grease in the floor mounted part to make it work better. by the way the company still makes them for sale.
|
GaryA
Dodge Dakota
JOIN HERE
9/09/2004
10:15:12
| looking for Mark III bodykit
IP: Logged
Message:
I have looked all over the net, and i still cant find where i can purchase a Mark III bodykit for my 1993 Dakota, can anyone help?
|
John Thomas
Dodge Dakota
JOIN HERE
10/01/2004
05:29:47
| RE: mark III
IP: Logged
Message:
I had a Mark III Dakota, it was viper red, I put a stock 99 R/T 360 motor in it, 4.10 gears. It ran 8.59 in the 1/8 mile! I want it back!!!!!!!!!!!!! IF you guys want to now what you have to do to put a 360 in your dakota e-mail me
|
Simone
Dodge Dakota
JOIN HERE
2/18/2009
10:47:06
| RE: mark III
IP: Logged
Message:
I am thinking about buying a '96 Dodge Dakota Mark III version from someone, and I am just curious to know if it would be a good buy. I'm going to trade him my vehicle which is up for $2500. Anyone think that would be a good deal?
Are they good trucks? Is it easy to find parts for it and to repair?
|
| | P 1 Next Page>> |
