| From | Message |
troubled
Dodge Dakota
JOIN HERE
2/28/2003
16:00:39
|
 Subject: stalling
IP: Logged
Message:
I have a 92 dakota 318 engin 4x4 keeps stalling spent over 2000 already trying to find the problem . I just put in a new feul pump and it ran great for a week then the feul guage quit and it started to stall again so we put another new one in and now I have a feul guage but its still stalling. can anyone help?
|
Brad Drake
Dodge Dakota
JOIN HERE
3/03/2003
03:47:48
| RE: stalling
IP: Logged
Message:
I rescently had a stalling problem with my 91 dakota. I ran a self test on the computer and it gave me a code 13. A code 13 according to the dodge manual means that the computer is not recieving a signal from the distributer during cranking. The magnetic pickup in the distributor is what sends the signal to the computer, so I replaced it and it has run fine ever since. If you want to run a self test on your computer, turn the key on and wait a few seconds. Next turn the key off and on 3 times, ending with the key on. (do this within 5 seconds) Watch the "check engine" light. the light will go out, then it will start flashing. count the number of times that it flashes. (remember this) there will be a short pause and it will flash again. Count the flashes again. Take the two numbers and put them together and you will have your code. Example: 3 flashes, pause, 3 flashes= code 33. between each code there will be a pause too. the computer will end with a code 55 to tell you that the test is over.
|
troubled
Dodge Dakota
JOIN HERE
3/04/2003
19:33:41
|  RE: stalling
IP: Logged
Message:
Well I tried your idea and got a code 12 which is a memory standby power lost? dont know what that means but Im going to check all my grounds because my battery and altenator are fine. thanks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
