| From | Message |
DAKDTP
Dodge Dakota
JOIN HERE
2/23/2003
12:10:49
|
 Subject: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
What does everyone run in the 1/4 with this combo? What mods are you running?
|
phantom505
Dodge Dakota
JOIN HERE
3/10/2003
02:59:40
|  RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
I don't even own one YET. But I would like to know too.
|
Nick
Dodge Dakota
JOIN HERE
3/10/2003
13:15:39
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
I have a 97 318 5spd, Current mods are 2.02 heads, 1.6 roller rockers, headers, 3 inch exhaust, ported TB, M1, R/T cam soon to be KRC 210X, MP computer. Current best time is a 14.8 at 95 which I think is a bit slow for this combo. I cant wait to try the new cam out once I get it.
|
lizard
Dodge Dakota
JOIN HERE
3/10/2003
18:04:07
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
you bought a truck; if you use it like I do those 38.5" boggers slow you down a little; I'm actually contemplating dropping in one of the new hemi engines; be a little costly but can you imagine?
|
peter boyle
Dodge Dakota
JOIN HERE
3/12/2003
21:20:33
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
98 5.2 v8 5spd reg cab. NO POWER ADDERS!12.76@105.16, 8.137@84.76, M1 2bbl w/ large turtle, f&b TB, KN FIPK, comp cam, Gibson Shorty Headers, JBA Y-pipes, spintech side swept exhaust, carsound cat, 1.6 roller rockers, venom chip, no spare tire, no toolbox, relocated battery to right rear (45 lbs minus from front) took all AC items off (55lbs), no windshield sprayer tank or sprayers, ,lexan one piece rear window, fiberglass cowl hood, removed interior stereo+speakers, no carpet, , no door panels, no passenger seat, no adjustable drivers seat (wieghs 11 lbs) both airbags out (gt steering wheel) no interior plastic except for dash, checkmate fx flush hard cover, fiberglass roll pan, lowered 3/5, removed gas tank (10 gallon fuel cell centered in bed, ss sport mirrors, stillen front fascia, TPS mod, IAC relocated, smaller belt b/c of no AC, ,centerforce stage II, Permacool 16in. electric fan, cal trac traction bars,Taylor 8mm Wires, Autolite 3923 plugs, ASP crank MT Streets 26x10.5x15, race fuel, fingers hurt from typing, rather be wrenching on the truck.
|
peter boyle
Dodge Dakota
JOIN HERE
3/12/2003
22:01:57
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Who needs a camaro SS with 325hp, my 5.2L, 225hp, 3700lb truck beat it bone stock at 13.4@101mph!
|
YEAH RIGHT
Dodge Dakota
JOIN HERE
3/12/2003
22:45:47
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Bull sh!t!!! Of course the thing will be fast! But who has that much time and the will to take all of that stuff off, just to gain a second or two? Come on get a friggin life.
|
real PETER
Dodge Dakota
JOIN HERE
3/12/2003
22:47:59
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
i didnt post the second post WTF? who ever posted that is just a worthless punk. first who ever said camaro SS? first they dont even make that car. also all 5.2L were 230hp and 300tq, not 225hp, you cant even produce the right numbers, also my dakota is way below 3700 lbs, didnt u notice all the wieght reduction? go bit*h somewhere else about your lil 4 banger dakota
|
dakota31852
Dodge Dakota
JOIN HERE
3/12/2003
22:54:14
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
No, some year (or all even, not sure) genII daks were rated at 225HP/295TQ man, look at the brochures...
TJ
dakota52318@toad.net
1992 Dodge Dakota 4X4
Long Bed, 318, 46RH Auto
DT Headers, Functional RamAir Hood
K&N FIPK, Flowmaster Muffler
Custom Throttle Body
MP Computer
15.74@87.59
4350lbs
|
peter boyle
Dodge Dakota
JOIN HERE
3/12/2003
23:14:49
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Ok, you got me... I'm full of crap.
|
Joe
Dodge Dakota
JOIN HERE
3/13/2003
10:36:48
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
LMAO! I'm gonna save this one!
"...12.76@105.16, 8.137@84.76..."
If you're gonna make up numbers, at least make them halfway believable. What a dumbass.
|
real PETER
Dodge Dakota
JOIN HERE
3/13/2003
14:41:03
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
I meant all 5.2 had 230hp and 300tq, i should have said 97+, and Joe, just b/c your dakota is slow as balls doesnt give you the right to judge mine time, you would be amazed how well some slicks and a 45 degree dry evening at the track lowers my et's over a hot summer day with road tires. (oh yea, this board has too many haters)
|
Joe
Dodge Dakota
JOIN HERE
3/13/2003
16:38:31
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
You're right Pete. I WOULD be amazed if slicks and 45° evening temp lowered your times by TWO SECONDS.
I'll tell you what I think, Pete. I think that YOU are the one that has the "4 banger", are about 17 years old, and have NEVER made a trip to the dragstrip in your life. If you have, you would know that you are so FULL OF ЅHIT when you claim 12 seconds. Like I said, next time you decide to lie about times, make it halfway believable.
|
Rod
Dodge Dakota
JOIN HERE
3/13/2003
18:44:07
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
I have a homemade intake, 275-60-15 tires, no muffler
and I ran a 15.6. In FL, so its humid. Not bad, but im
gonna get a cam, roller rockers, port my heads, and get
some headers. I also just got my Mopar PCM, so
hopefully mid 14's. Dunno though
|
real PETER
Dodge Dakota
JOIN HERE
3/13/2003
19:39:15
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
thats high 12 seconds, dont make it sound like 12.1 or something. go bag and drop your 4 banger and definetly buy TB spacer u 16 yr old punk.
|
Give it up
Dodge Dakota
JOIN HERE
3/13/2003
19:47:26
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Dude, you are full of crap. I hate to say it, but Joe (the site dickhead) is right. There is no way in hell you can run a 12.76 with those mods.
|
peter boyle
Dodge Dakota
JOIN HERE
3/13/2003
20:04:07
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
yeah, i must have got a good truck or something from the factory. my bolt on mods give me about 290hp (at the crank, which is only about 245 at the wheels) and the slight weight reduction has my dodge beating stock Z06's (12.8 sec @ 114 mph/405HP), stock 911 turbo's (12.9 sec @ 115 mph/415HP), and sometimes stock viper GTS ACR's (12.6 sec @ 117 mph/460HP)!
|
peter boyle
Dodge Dakota
JOIN HERE
3/13/2003
20:32:42
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
forgot to mention that all of those cars are lighter than my truck, even with my weight savings. man, i'm lucky to be able to beat them! why would you think i am full of crap?
|
real PETER
Dodge Dakota
JOIN HERE
3/14/2003
11:02:28
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
OK, i was lying. i'm sorry. its just that I have a slow V6 and wanted to sound cool. sorry. i really run 17.52@70mph.
|
02RT
Dodge Dakota
JOIN HERE
3/14/2003
13:25:35
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
You can't be serious. 12.76 NA? YEAH RIGHT!!!
|
derOL
Dodge Dakota
JOIN HERE
3/15/2003
00:43:24
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
YOU CAN ALL SUCK MY BIG BLACK COC*K
|
Joe
Dodge Dakota
JOIN HERE
3/16/2003
20:08:32
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Why are you mad? You got caught in a STUPID lie, get over it. What's funny is that you were trying to defend it. And now you're mad, LOL!
You do have a V6, don't you.
|
griffin7878
Dodge Dakota
JOIN HERE
7/27/2003
21:18:30
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
I have a '98 reg cab short bed 5 spd. Self-ported tb, advanced timing, hypertech power programmer, 3" flowmaster exhaust with no cat, IAT adjust, homebrew intake, TPS at .72 volts, vaccuum mod. No spare or tail gate with street tires.No headers/cam/rockers /headwork. Ran a 14.85 1/4 with a 2.1 sec 60 foot time in the alabama heat the other day. A 12 second dakota on straight motor is possible with the right heads cam gears, etc... I pulled out in front of an s 10 the other day - I won, he had to get towed. I think I will get my handles and gas lid shaved while it's getting sprayed and put a fuel cell in the bed. I will probably keep the stock tank for now so I can keep the stock pump. Anyone know if the stock pump can be used in an aftermarket cell ?
|
Vantage
GenIII
7/27/2003
22:00:09
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Last year a guy ran a 14.9 with a bone stock 5.2 5 speed RC 3.92 LSD and slicks. Mine ran a 15.7 with a 3.55 open. That was with K&N and MP PCM and terrible 60' times. Never made it back after more mods. Today I saw a Hemi Ram (QC 4WD) run a 16.25 compared to a Mercedes ~16.7. Was kinda impressed.
|
Dakota Owner
Dodge Dakota
JOIN HERE
7/28/2003
00:51:54
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
www.dragtruck.com You want drag times, here you go. I will admit, some of the entries are Bulls**t, but a majority of them are accurate. Compare the 1/4 and 1/8 mile times. Peter Boyle- a 12.7 1/4mile with low 8's 1/8mile is very accurate so either he is telling the truth or knows the correct times. High 12's on all motor is easy with the right kind of $$. Obviously the "stock 225hp dak beating a scumaro SS w/ a 13.4" is a fake and bullsh**t post, but a reg. cab dak V8 with the right mods can easily be 13's on all motor and yes, all that sh*t removed will definately lose weight. It all adds up. Please, people, do some research before posting and it doesnt do any good to copy a name and write a childish remark. Brad P. '88 Dakota soon to be smallblock sleeper!
|
JOELS RIDE
Dodge Dakota
JOIN HERE
7/29/2003
20:15:00
|  RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
Sorry guys but my 95 , 5.2L ,with 392,5speed,and camper shell, ran a 15.18 @90.86 I had wheel hop bad.and that was the first time i ever ran it,on top of that it only has 157,000 miles on it and I bought it new,and never had trans work or motor or rear end work. how about that.
|
Nick
Dodge Dakota
JOIN HERE
7/30/2003
12:27:52
| RE: 97-up 5.2 5spd 1/4 times
IP: Logged
Message:
14.3 @ 97, 2.02 heads, KRC 210X cam, 1.6 roller rockers, MP headers-computer, M1, ported TB, 5spd, 3.92..
|
| | P 1 Next Page>> |
