| From | Message |
Joe
Dodge Dakota
JOIN HERE
2/21/2003
22:17:26
|
 Subject: Second gear start
IP: Logged
Message:
I have a 1997 5.2 Automatic Dak. I come to a full stop, when I take off it starts in second gear. Everything shifts fine no hard clunks or slips. If i come to a full stop and shift into first, put it into drive than it'll take off like normal.....Next full stop second gear start....
has 86,000 miles full service tranny fluid replaced at 80,000 by Aamco transmissions. Any suggestions from this expert panel appreciated.
Joe
|
goz
Dodge Dakota
JOIN HERE
2/22/2003
00:52:49
| RE: Second gear start
IP: Logged
Message:
im a dodge tech. your year truck first and second are controlled by your kick down cable have you cable adjustment checked. if that don't do it could be you govener and govener pressure sensor. goo luck hope i helped
|
sidney
Dodge Dakota
JOIN HERE
3/26/2003
20:04:37
| RE: Second gear start
IP: Logged
Message:
I have the same problem.
Where is the govenor and govenor pressure sensor located...Is there a website that can walk me through it
|
slow2dak
Dodge Dakota
JOIN HERE
3/26/2003
22:37:53
|  RE: Second gear start
IP: Logged
Message:
the governor pressure sensor is located on the right side of the valve body inside the pan. once you pull the pan off, its self explanatory on how to get it out.
mike
02 4.7/Auto RC Sport
3.55 and a one legged wonder
removed 3rd cat, single 3" w/flowmaster
tps .701
relocated IAT
Adjustable ECT sensor
K & N drop in
Removed rubber flap
Unplugged LPS(soon to be adjustable
Best 1/4: 15.40 @ 89.54
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
