| From | Message |
Joshua
Dodge Dakota
JOIN HERE
2/21/2003
18:04:14
|
 Subject: Mopar Accessories
IP: Logged
Message:
Does Dodge offer any other performance parts from Mopar other than cams and intake? Do they offer anything else like headers or throttle body?
|
Rod
Dodge Dakota
JOIN HERE
2/21/2003
22:02:53
|  RE: Mopar Accessories
IP: Logged
Message:
Mopar has the two best parts for daks, in my opinion.
The Mopar PCM (22 hp, 30 tq, 6000 rpm). and a set of
sweet ass headers. Im getting the headers next week,
and just installed the pcm. Its great
|
Joshua
Dodge Dakota
JOIN HERE
2/22/2003
02:30:22
| RE: Mopar Accessories
IP: Logged
Message:
Thanks Rod. So, what other kind of performance parts does Mopar make for the 4.7?
|
kennungesser
*GenI*
2/22/2003
08:30:15
| RE: Mopar Accessories
IP: Logged
Message:
I should know this , but is the The Mopar PCM for the 4.7L or just the 5.9L?
Kenneth L Nungesser
"We are determined to defend our lands and, if it be the "Great Spirit's" will, we wish to leave our bones upon them."
Tecumseh, Shawnee Chief 1813
|
darcy
GenIII
2/22/2003
13:26:27
|  RE: Mopar Accessories
IP: Logged
Message:
Last I heard, Mopar has a part number for the 4.7 PCM but the part doesn't exist...
Jashua, I don't think he realized that you meant the 4.7 because they don't make headers for it...
2002 Dakota Sport 4.7 V8 Club Cab
|
azdak
Dodge Dakota
JOIN HERE
2/22/2003
21:08:06
| RE: Mopar Accessories
IP: Logged
Message:
the headers are a waste they only flow like 2% better than the log type. spend the $ on t-body,air intake, 180 stat,move the i.a.t. or build a simulator as i did easy and it all is a lot less than a set of headers.
|
Demon Dakota
DakotaEnthusiast
2/22/2003
23:40:54
| RE: Mopar Accessories
IP: Logged
Message:
The headers have to flow better than just 2%. I just don't see how that is possible (not with the gains I've seen in the trucks that have them installed).
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
Joshua
Dodge Dakota
JOIN HERE
2/23/2003
02:40:03
| RE: Mopar Accessories
IP: Logged
Message:
Hey Demon Dakota, the throttle body you installed on your Dakota, did it void your warranty? And also is if installed headers, not from mopar since they don't make any for the 4.7, would that also void my warranty?
|
Joshua
Dodge Dakota
JOIN HERE
2/23/2003
02:48:38
| RE: Mopar Accessories
IP: Logged
Message:
Oh ya, would pulleys void the warranty also?
|
danny
Dodge Dakota
JOIN HERE
2/23/2003
08:15:06
| RE: Mopar Accessories
IP: Logged
Message:
All together now..............
|
adam andrew
Dodge Dakota
JOIN HERE
2/23/2003
14:37:35
| mods to make
IP: Logged
Message:
i have a 96 cc 4x4 with a 318 and i want to make some mods but i dont know what to do so far i only have a exhaust and a k&n filter what else can i do with out spending a lot of money
|
darcy
GenIII
2/23/2003
16:28:54
|  RE: Mopar Accessories
IP: Logged
Message:
Don't bother with headers on the 4.7 the existing exhaust manifold flows really well, also, the only headers available are shorties... at least wait until someone comes out with full length headers.
2002 Dakota Sport 4.7 V8 Club Cab
|
Joshua
Dodge Dakota
JOIN HERE
2/23/2003
18:20:35
| RE: Mopar Accessories
IP: Logged
Message:
If i got the M-1 intake manifold for the 4.7, would the K&N FIPK intake system still work for the new manifold?
And how many cats do you need in order to pass emissions?
|
slow2dak
Dodge Dakota
JOIN HERE
2/23/2003
18:40:07
|  RE: Mopar Accessories
IP: Logged
Message:
joshua, i dont know if you have looked at the M1 intake versus the intake manifold on a 4.7, but its a tad bit different. totally different motors bro. and to legally pass emissions you have to have all three cats but there are ways around it.
|
Robert
Dodge Dakota
JOIN HERE
2/23/2003
20:22:29
| RE: Mopar Accessories
IP: Logged
Message:
I think joshua meant the M1 intake for the 4.7 liter. I thought that the FIPK for the stock 4.7 intake manifold would also fit the M1 intake manifold for the 4.7. I say this because i was about to order one for mine. I could use some feedback please. Thanks
|
Wade
Dodge Dakota
JOIN HERE
2/23/2003
20:28:08
| RE: Mopar Accessories
IP: Logged
Message:
See, i thought you could pass with just 2 cats. I don't really see how the 3rd one could make much of a difference. I would like to know how that is. If it could pass with 2 cats, could they be high flow cats like Car Sound? Or would that not pass
|
darcy
GenIII
2/24/2003
00:52:56
| RE: Mopar Accessories
IP: Logged
Message:
Guys... there is no M1 intake manifold for the 4.7
Also, and I may be wrong, but I don't think that there is a FIPK for the 4.7 yet... just a drop-in filter...again, I may be wrong...
2002 Dakota Sport 4.7 V8 Club Cab
|
ShortSport
GenIII
2/24/2003
01:20:18
| RE: Mopar Accessories
IP: Logged
Message:
darcy is write on both counts 2002 fipk is not yet available so the k&n rep tells me ....however he said in spring it will be
2002 Reg cab 4x2 4.7 5-spd 3.55.1 LSD
fiberglass tonneau cover; stainless steel cat-back dual exhaust; magnaflow muffler
Go hard or go home!!
|
ShortSport
GenIII
2/24/2003
01:20:59
| RE: Mopar Accessories
IP: Logged
Message:
right
2002 Reg cab 4x2 4.7 5-spd 3.55.1 LSD
fiberglass tonneau cover; stainless steel cat-back dual exhaust; magnaflow muffler
Go hard or go home!!
|
darcy
GenIII
2/24/2003
02:23:29
|  RE: Mopar Accessories
IP: Logged
Message:
Thanks ShortSport, that's what I thought... Nice truck by the way!
2002 Dakota Sport 4.7 V8 Club Cab
|
Wade
Dodge Dakota
JOIN HERE
2/24/2003
18:20:16
| RE: Mopar Accessories
IP: Logged
Message:
I thought you could pass with just 2 cats. I don't really see how the 3rd one could make much of a difference. I would like to know how that is. If it could pass with 2 cats, could they be high flow cats like Car Sound? Or would that not pass?
Does Mopar make a PCM for the 4.7?
|
| | P 1 Next Page>> |
