From | Message |
Kevin Dodge Dakota JOIN HERE
2/06/2003 18:18:05
|
Subject: 5.9 liter hp IP: Logged
Message: Hey Guys. I have a chance to buy a 97 Ram with only 34000 miles on it. Sweet truck. It has the 5.9 liter and was wondering how many hp it would have? Thanks for your help.
|
sdfhgd Dodge Dakota JOIN HERE
2/06/2003 21:20:34
| RE: 5.9 liter hp IP: Logged
Message: i think its pushin 300 but im not sure
|
Ian Dodge Dakota JOIN HERE
2/06/2003 21:41:58
| RE: 5.9 liter hp IP: Logged
Message: 245-250hp at the crank, probably about 200hp at the wheels
|
HSKR Dodge Dakota JOIN HERE
2/07/2003 01:08:43
| RE: 5.9 liter hp IP: Logged
Message: The 5.9 in the ram stock was rated at 245 at the crank.
|
Kevin Dodge Dakota JOIN HERE
2/07/2003 06:04:48
| RE: 5.9 liter hp IP: Logged
Message: Thanks for the help guys. Hopin' it would be in the 250-260 range as I have a truck camper and 14ft fishin' boat to haul. What mod's would help push out a few more ponies? Thanks again.
|
vinny Dodge Dakota JOIN HERE
2/07/2003 06:19:32
| RE: 5.9 liter hp IP: Logged
Message: Cold air intake
|
Texas Todd Dodge Dakota JOIN HERE
2/07/2003 09:43:01
| RE: 5.9 liter hp IP: Logged
Message: The 5.9 has a lot of good low end torque, and is said to be good for towing, in stock form. This from a dak 4.7'er.
|
Texas Todd Dodge Dakota JOIN HERE
2/07/2003 09:45:03
| RE: 5.9 liter hp IP: Logged
Message: And by the way, 'sd....'
Where did you get 300? With some serious mods, yes, stock, almost overrated at 245, and that's at the crank as said.
|
Joey Dodge Dakota JOIN HERE
2/11/2003 01:29:06
| RE: 5.9 liter hp IP: Logged
Message: I was recently looking on the mopar performance parts website and saw that they make 1.7 roller rockers, r/t camshafts, r/t cylinder heads, and the m1 manifold. All of these parts ended up costing around $2500. These are all internal mods that i wouldnt really want to attempt myself so i was just wondering the aproximate cost of labor charges if i was to have a professional dodge dealer install the parts for me. If anyone can help me figure this out it would be a great help. thanks.
|
matt Dodge Dakota JOIN HERE
2/11/2003 14:18:21
| RE: 5.9 liter hp IP: Logged
Message: if you have the dealer do it your lookin at somewhere around $800-1000 or more. find a nice performance shop somewhere. they are usually reliable and it wont cost quite as much. im not positive but im pretty sure for the m1 you can just unbolt a few bolt and slap it on in place of the old intake. hope to save you a little money.
peace
matt
|
Joey Dodge Dakota JOIN HERE
2/11/2003 15:12:04
| RE: 5.9 liter hp IP: Logged
Message: Yea thats kinda wat i was thinkin, around a grand for the install but yea ill look into doin the m1 myself. thanks matt.
|
jake Dodge Dakota JOIN HERE
2/12/2003 00:43:43
| RE: 5.9 liter hp IP: Logged
Message: r/t cam is a no no...
|
Joey Dodge Dakota JOIN HERE
2/12/2003 18:07:42
| RE: 5.9 liter hp IP: Logged
Message: Why? wat is wrong with the R/T cam Jake?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|