| From | Message |
Matt01RT
Dodge Dakota
JOIN HERE
2/05/2003
12:43:50
|
 Subject: Roller Rockers and Turtles
IP: Logged
Message:
I am getting ready for the strips to open and am putting the last finishing touches on my 2001 R/T. I am getting ready to bye some roller rockers and was wanting a little help. What are the best and what do you all need. I have heard that the Cower Rockers are the best, is that true. Does anyone know what how much they are? I was also wondering if you need to buy anything else when you get them, like a differn't size push rods or any thing.
One last thing. I am wanting to buy an extra large turtle like everyone has been talking about. Just wondering where i could get one and how much also. Thanks for all the help.
|
Frankie
Dodge Dakota
JOIN HERE
2/05/2003
19:05:15
|  RE: Roller Rockers and Turtles
IP: Logged
Message:
www.socaldakota.com sells them.
|
Matt01RT
Dodge Dakota
JOIN HERE
2/05/2003
20:08:44
| RE: Roller Rockers and Turtles
IP: Logged
Message:
thanks
|
texaslawdawg
Dodge Dakota
JOIN HERE
2/05/2003
21:08:24
| RE: Roller Rockers and Turtles
IP: Logged
Message:
I chose the Harland Sharp non-adjustable aluminum 1.7 roller rockers. Super easy install, much much more easier than Crower. $298 shipped to my door from SouthEastRT.com, they were specifically designed with our trucks in mind.
|
Matt01RT
Dodge Dakota
JOIN HERE
2/05/2003
21:10:24
| RE: Roller Rockers and Turtles
IP: Logged
Message:
Thanks texas for the imput. I might check into them.
|
Buzz
Dodge Dakota
JOIN HERE
2/05/2003
22:12:23
| RE: Roller Rockers and Turtles
IP: Logged
Message:
I would watchout for the Harland Sharp ones... if you are using a stock cam they are fine, but if you change the cam you have to get a kit that will make them adjustable... honestly the crower stainless 1.7 are worth the price... you can get some aluminum ones from comp cams that have a more reasonable price... no offense to John M. on his rocker design.
|
DakotaDan
*GenIII*
2/05/2003
22:25:59
|  RE: Roller Rockers and Turtles
IP: Logged
Message:
If you have or are removing your rev limiter you might want to look into the High Rev kit (longer push rods & guide plates)
CROWER INFO
as Frankie posted Sam at SoCA usually has the best prices and is great if you have any questions.
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
Buzz
Dodge Dakota
JOIN HERE
2/06/2003
02:57:46
| RE: Roller Rockers and Turtles
IP: Logged
Message:
Sam is good... I have also got some great deals from Randy Pyle at world wide performance parts... it is a dodge specialty shop.
|
Matt01RT
Dodge Dakota
JOIN HERE
2/06/2003
11:20:24
| RE: Roller Rockers and Turtles
IP: Logged
Message:
Thanks for all the help guys. Yeah...i did already install the new Hypertech Power Programmer III, which did up my rev limiter.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
