| From | Message |
bigfoot
Dodge Dakota
JOIN HERE
1/08/2003
21:14:24
|
 Subject: burnouts
IP: Logged
Message:
how do you guys do these??? and what is power braking???
|
afi360
*R/T*
 
1/08/2003
22:34:46
| RE: burnouts
IP: Logged
Message:
when i want to melt my tires (which is a lot, cuz i hate these toyos) i push the brake in, using a little extra pressure. then i ease onto the gas until im at about 2000 rpm (maybe less, maybe more on different models), then ease off the brake. depending on if you want to spin your tires for a block, or just sit still and smoke em, use different pressure on the brake, and add more throttle. i think that is by definition, power braking, and/or brake torqueing, but im not positive :)
have fun, but remember why your tires are bald every 10000 miles!!
**in shadows growing wings**
|
Demon-Xanth
Dodge Dakota
JOIN HERE
1/09/2003
10:01:16
| RE: burnouts
IP: Logged
Message:
Brake torquing is pressing on the gas and the clutch, but not spinning the wheels, to get the engine on the cam and the converter upto stall. A little less brake pressure and a brake torque can turn into a burnout :)
Manuals have a bit more involved procedure that involves a little bit of dancing.
|
LIL DQ
R/T
1/09/2003
20:28:32
| RE: burnouts
IP: Logged
Message:
I just stand on the brake and ease into the gas till the tires are screamin' hehehehe
Doc
02 CC R/T slightly modified
|
stormin
Dodge Dakota
JOIN HERE
1/09/2003
22:54:20
| RE: burnouts
IP: Logged
Message:
when i had my 95 cc i hold down the break and mash the gas and wait for the sweet smell of burning rubber and try to see through the thick white smoke .
|
Landon
Dodge Dakota
JOIN HERE
1/19/2003
17:07:26
|  RE: burnouts
IP: Logged
Message:
Yeah it's a bit of dancing with the clutch and trying to do a "brake stand" or whatever you want to call it. With a 318 stick who needs to use the break?? I don't and my tires tend to smoke nicely through 3rd and if i'm quick enough 4th... not too good for the tranny though...
|
Steve
Dodge Dakota
JOIN HERE
1/19/2003
21:30:03
| RE: burnouts
IP: Logged
Message:
is there any kind of shutoff on dakotas? i'm no pro at brake stands, so maybe i'm just not doing it right. but i tried twice with my 01 rc 287 5 speed 3.92 LSD, and i got them smoking pretty quick, but then it died right out. i tried again and it did the same. i can't remember any rpms, i wasn't watching them. so maybe i just need a little more practice.
|
91DakotaFreak
Dodge Dakota
JOIN HERE
1/20/2003
00:35:00
| RE: burnouts
IP: Logged
Message:
What i do with mine is drop it inot first and hold it there while watching th tach and peg it at wbout 2500-3000rpm while holding the break and fethering the pettle. I have gone into third andcould have gone into 4th but decided to save the tires and trans just a little. lol I figure thats pretty good for being and Auto with a sure grip
|
yates-in-DE
*GenIII*
1/20/2003
16:00:33
| RE: burnouts
IP: Logged
Message:
Steve instead of using first in that beast get about 4000+ rpm's in second dump the clutch and try to keep it pointed the way you want to go.
Later,
Lynn
|
99dakota
Dodge Dakota
JOIN HERE
1/20/2003
20:00:05
| RE: burnouts
IP: Logged
Message:
w/ my 4x4 cc 5.2L 5 speed just feather out the clutch and shift 2nd before redline and the is somewhere over 100feet of rubber and into 3rd if I want too. I hate my open diff.
|
1992 Dakota
Dodge Dakota
JOIN HERE
2/03/2003
21:30:45
|  RE: burnouts
IP: Logged
Message:
I have a 1992 Dakota 4x4 with a 5.2. With my open diff. my drivers side tire is bald and my passenger tire is at 50% tread. I hate my open diff. as well.
|
Tyler
Dodge Dakota
JOIN HERE
2/03/2003
21:33:12
| RE: burnouts
IP: Logged
Message:
On dry concrete I con roach 'em 100-120ft. I have a 1992 Dakota 4x4 with a 5.2
|
Texas Todd
Dodge Dakota
JOIN HERE
2/04/2003
09:39:28
| RE: burnouts
IP: Logged
Message:
Tyler, put in in 4wheel drive and launch that sucker!
|
RaZoR
Dodge Dakota
JOIN HERE
2/07/2003
19:26:41
| RE: burnouts
IP: Logged
Message:
I have tried this with my 00 4.7 auto dak. I've never actually been able to bust em loose..... i think i'm too nervous about breaking something.... if i'm holding on the brake and pressing the gas will the abs not just go nutz when the back tires start spinning????
|
kotart13
Dodge Dakota
JOIN HERE
2/07/2003
21:26:57
| RE: burnouts
IP: Logged
Message:
how bout mashing the gas? my tires spin till redline, from a stop, untill the computer bumps me back down...
you guys are looking for ways to spin your tires, while im looking for ways to stop them, lol. what i wouldnt give for some slicks!
|
yathink25
Dodge Dakota
JOIN HERE
2/13/2003
22:17:17
| RE: burnouts
IP: Logged
Message:
it must be something with the 4.7 cause i had 100 miles it would burn the hell out of my 265/70/16's now with 5,200 and a flow act's like it's strainig 02 4/4 QC 4.7
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
